Thermal Shock Test Chamber

Operating interface, easy to operate, high temperature Impact or low temperature Impact, the maximum time up to 999h, the maximum cycle up to 9999 times.

Low temperature Impact -40 ℃~ -10 ℃, high temperature Impact + 60 ℃~ + 150 ℃, capacity 50L, water-cooled, automatic defrosting, suitable for metal, plastic, rubber, electronics and other materials industries, with USB interface.

Inner tank size 350 * 350 * 400mm, high temperature tank temperature range 80 ℃~ 200 ℃, low temperature tank temperature range -75 ℃~ -10 ℃, laboratory impact temperature high temperature: 60 ℃~ 150 ℃, low temperature: -10 ℃~ -60 ℃, heating rate 60~ 200 ℃ Technologies 25min, cooling rate 20~ -75 ℃ Technologies 90min

Inner tank size 600 * 500 * 500mm, high temperature tank temperature range 80 ℃~ 200 ℃, low temperature tank temperature range -40 ℃~ -10 ℃, laboratory impact temperature high temperature: 60 ℃~ 150 ℃, low temperature: -10 ℃~ -40 ℃, heating rate 60~ 200 ℃ Technologies 25min, cooling rate 20 ℃~ -55 ℃ about 60 minutes

Inner tank size 600 * 500 * 500mm, high temperature tank temperature range 80 ℃~ 200 ℃, low temperature tank temperature range -75 ℃~ -10 ℃, laboratory impact temperature high temperature: 60 ℃~ 150 ℃, low temperature: -10 ℃~ -60 ℃, heating rate 60~ 200 ℃ Technologies 25min, cooling rate 20~ -75 ℃ Technologies 90min

Inner tank size 400 * 350 * 350mm, high temperature tank temperature range 80 ℃~ 200 ℃, low temperature tank temperature range -40 ℃~ -10 ℃, laboratory impact temperature high temperature: 60 ℃~ 150 ℃, low temperature: -10 ℃~ -40 ℃, heating rate 60~ 200 ℃ Technologies 25min, cooling rate 20 ℃~ -55 ℃ about 60 minutes

Touch screen programmable temperature controller, temperature control -55 ℃~ + 150 ℃, volume 50L, support temperature alarm display and real-time temperature Linear dispersion display, multiple safety protection, can be used for normal temperature Impact.

Pendulum energy 2.75J, 5.5J, 11J, Impact speed 3.5M/s, Impact blade angle 37 ° +/- 1 °, suitable for hard plastics, reinforced nylon, FRP, ceramics, cast stone, electrical insulation materials and other Non-metallic materials Impact determination.

Original imported color touch temperature controller, temperature control -65 ℃~ + 150 ℃, volume 150L, HFC environmentally friendly refrigerant refrigeration, with paperless recording function, real-time display of Linear dispersion diagram of temperature Impact test changes.

High temperature zone, low temperature zone, test zone three boxes, volume 225L, stainless steel inner box material, suitable for testing material structure or composite, temperature control accuracy +/- 0.5 ℃.

Test box Temperature Impact range High temperature box: + 50 ℃~ 180 ℃; Low temperature box: 0 ℃~ -55 ℃, Temperature stability +/- 2 ℃;, Temperature error +/- 2 ℃;, Heating rate from room temperature~ 180 ℃ ≤ 30min;, Cooling rate from room temperature~ -55 ℃ ≤ 60min.

Adopt temperature controller imported from Japan, temperature control -40 ℃~ + 150 ℃, volume 50L, use HFC environmentally friendly refrigerant, with paperless recording function, heat & cold shock temperature recovery time within 5 minutes.

Low temperature Impact -40 ℃~ -10 ℃, high temperature Impact + 60 ℃~ + 150 ℃, capacity 150L, hatchback basket type, water-cooled refrigeration, automatic defrosting, suitable for metal, plastic, rubber, electronics and other materials industries, with USB interface.