¥3090.00
SE
LANDTEK HM-934-1 digital display pasteurized durometer special indentation hardness tester for aluminum industry
Suitable for soft aluminum or aluminum alloy; can record the maximum hardness value; one pressure is measured, in line with ASTM B648, HD2583, GB/T3854 standards.
Compare
¥1580.00
SE
LANDTEK HT-6510S-C Sand Surface Sclerometer Sand
Compression stroke 2.50mm, load 1500g, pressurized load 180g, indenter shape and size ball R1.20, Measurement Units HC, suitable for high pressure sand surface Hardness test.
Compare
¥3860.00
SE
Pap Sclerometer HBa-1 + Digital Display Portable Pap Sclerometer
Resolution 0.1Hba; in line with ASTM B648, ASTM HD2583, GB/T3854 standards; with equilibrate positioning device, Hardness value digital display device, no-removal Hardness value calibrate adjustment device; can measure Pap/Brinell/Vickers/Wechsler/Rockwell various Hardness values.
Compare
¥2500.00
SE
LEEB W-20b Wechsler hardness tester measuring aluminum alloy, workpiece size thickness 0.4-8mm
Measuring hardness range of 25~ 110HRE aluminum alloy, handheld design, workpiece size thickness 0.4-8mm, inner diameter > 6mm, range 0~ 20HW, through anodic oxidation treatment, high toughness table glass.
Compare
¥1580.00
SE
LANDTEK HT-6510S-B Sand Surface Sclerometer Fine, Coarse Sand/Core
Shrinkage stroke 2.50mm, load 980g, pressurized load 50g, indenter shape and size ball R12.70, Measurement Units HB, suitable for surface Hardness testing of fine, coarse sand/core in manual or mechanical low and medium pressure molding.
Compare
¥2100.00
SE
LEEB W-20 Wechsler hardness tester for aluminum alloy hardness range 25~ 110HRE
Test aluminum alloy, workpiece size thickness 0.4-6mm, inner diameter > 10mm, in line with Chinese non-ferrous metals standard YS/T420-2000 and American standard ASTM B647-84.
Compare
¥1580.00
SE
LANDTEK HT-6510S-A Sand Surface Sclerometer Fine Sand/Core
Compression stroke 2.50mm, load 237g, pre-pressure load 90g, indenter shape and size ball R2.50, Measurement Units HA, suitable for surface Hardness testing of fine sand molds/cores with manual or mechanical low and medium pressure molding.
Compare
¥2500.00
SE
LEEB W-B92 Wechsler hardness tester for cold rolled thin steel strips
Hardness range 50~ 92HRB, test stainless steel strip cold rolled thin steel strip, workpiece size thickness 0.4-6mm, inner diameter > 10mm, range 0~ 20HW, accuracy 0.5HW, in line with national standards, can be Measurement.
Compare
¥2500.00
SE
LEEB W-B75b brass Wechsler hardness tester workpiece size thickness 0.4-8mm
Test brass, hardness range 63~ 105HRF, workpiece size thickness 0.4-8mm, inner diameter > 6mm, through anodic oxidation treatment, high toughness table glass, clear scale.
Compare
¥2400.00
SE
LEEB W-B75 brass Wechsler hardness tester workpiece size thickness 0.4-6mm
Measuring hardness of 63~ 105HRF brass, handheld design, workpiece size thickness 0.4-6mm, inner diameter > 10mm, through anodic oxidation treatment, high toughness table glass.
Compare
¥2230.00
SE
DUBAN DB25-204G Grain feed pellet durometer
Designed for grain feed pellets. The durometer offers significant advantages such as high-precision, easy operation and portability. It offers four different measurement units: N (Newton), kg (kg), lb (lb), g (gram), which can be switched and converted to each other as needed.
Compare
¥2500.00
SE
LEEB W-20a Wechsler hardness tester for measuring aluminum alloys, workpiece size thickness 0.4-13mm
Test aluminum alloy, workpiece size thickness 0.4~ 13mm, inner diameter > 10mm, hardness range 25~ 110HRE, anodic oxidation treatment, high toughness table glass, can be over Measurement.
Compare
If you don't know how to choose "Miscellaneous Sclerometer", please consult customer service.