Price:
Specs:
Measurement principle
Measurement method
Measurement function
Probe Type
Calibrated certificate
Standard
$883.32
SE
IPRE SR500 Roughometer OLED Digital Display
Ra:0.025-12.5μm
Using ARM for control and data processing, fast, low power consumption, rich display information, intuitive, can display all parameters and graphics.
Compare
Login
PRSR210 Digital Roughness Gauge supports 13 measurement parameters
Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、RmrOutput: 0.025 ~ 12.5μm
Compare
Login
High-precision Roughness Gauge KAIRDA NDT150 surface roughness testing instrument
Ra、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrZ axis (vertical): 160μm; X axis (horizontal): 17.5mm
Compare
Login
PRSR200 Roughness Gauge supports 16 measurement parameters
Ra、Rq(0.005~16μm);Rz、Ry、Rt、Rp、Rv、Rmax、R3z、Rz(JIS)(0.02~160μm);RS、RSm(1mm);Rmr、Rsk(0~100%)Ra , Rz , Rq , Rt , Rp , Rv , R3z , R3y , RzJIS , Rsk , Rku , Rsm , Rmr
Compare
Login
KAIRDA NDT160 Roughness Gauge split surface roughness tester
Ra,Rz,Rq,Rt,Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr; Ry(JIS);Rmax,RPc,Rk,Rpk,Rvk,Mr1,Mr2Z-axis (vertical): ± 80μm/± 160µm (enhanced); X-axis (horizontal): 20mm
Compare
Login
Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections
Ra、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrRa: 0.005µm ~ 16.00µm
Compare
$11501.43
SE
IPRE RA150 asperity Profile Gauge resolution 0.02μm
The integrated design can simultaneously perform asperity, waviness, and profile measurement without replacing the probe. The high-precision grating measurement system and high-precision Inductance measurement system are selected, and the measurement accuracy is high.
Compare
$1238.43
SE
LEEB462 surface roughness multiparameter measurement supports bluetooth printing and mobile app
Support Bluetooth printing and mobile app operation, simple button and touch screen dual operation, support lateral, upward and other direction measurement, multiparameter measurement, large-capacity Data storage.
Compare
$901.69
SE
LEEB432 surface roughness instrument multiparameter measurement Measurement range 160μm
160μm
Multiparameter measurement, OLED dot matrix display, mechatronics design, using DSP chip for control and data processing, can store 100 sets of original data sources, compatible with multiple national standards.
Compare
$653.73
SE
IPRE SR400 Roughometer OLED Digital Display
Ra:0.025-12.5μm
Using ARM for control and data processing, fast, low power consumption, rich display information, intuitive, can display all parameters and graphics.
Compare
$1085.37
SE
KAIRDA NDT161 surface roughness tester, contact asperity tester
Ra、Rz、Rq、Rt、Rc、Rp、Rv、R3z、R3y、Rz(JIS)、Ry、Rs、Rsk、Rku、Rmax、Rsm、Rmr、Rpc、Rk、Rpk、Rvk、Mr1、Mr2Z axis (vertical): 320μm (-160μm~ 160μm)/Ra (0.005-32um) Rz (0.02-320); X axis (horizontal): 17.5mm (0.69inch)
Measurement range Z-axis (vertical): 320μm (-160μm~ 160μm)/Ra (0.005-32um) Rz (0.02-320); X-axis (horizontal): 17.5mm (0.69inch), Sensors Measurement principle: displacement type differential electrical stylus: diamond, 90 taper angle, 5μm tip radius force: stylus force: 4mN; guide force: < 400mN guide: carbide.
Compare
$1513.95
SE
KAIRDA NDT180 Roughness Gauge
Ra Rz Rq Rt Rc Rp Rv R3z R3y Rz(JIS)Ry Rs Rsk Rku Rmax Rsm Rmr RPc Rk Rpk Rvk Mr1 Mr2Z-axis (vertical): 640μm (-320μm~ 320μm); X-axis (horizontal): 17.5mm (0.69 inch)
Metal shell, with printing, large range, high-precision, Bluetooth, mobile app.
Compare
$702.71
SE
LEEB LBTQ914 surface roughness probe asperity detector, multiparameter
Multiparameter, efficient DSP chip for fast data processing and accurate measurement, rich display information and visual graphics output.
Compare
$626.17
SE
KAIRDA NDT150A surface roughness instrument
Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)Ra、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2
Measurement range Z axis (vertical): 160μm; X axis (horizontal): 17.5mm (0.69inch), resolution Z axis (vertical) 0.002μm/+/- 20μm; 0.004μm/+/- 40μm; 0.008μm/+/- 80μm, in line with ISO, DIN, ANSI, JIS and other standards.
Compare
If you don't know how to choose "Roughometer", please consult customer service.