Germany HTechMT SP100 Pointer Roughness Gauge

Introduction

Surface roughness meters are used to accurately measure the peak to surface roughness of sandblasted or shot blasted surfaces. The average value of a series of measurements is the surface roughness of the measured surface. Allows comparison of surfaces during spraying. In addition to roughness assessment of sandblasted or shot blasted surfaces, the instrument can also be used to measure the depth of pits caused by corrosion. The instrument has an accuracy of up to 1um. Implementation standards: ASTM D4417 and SANS 5772

Instructions

1. Place the surface roughness meter on the glass piece, press the base firmly, and adjust the reading of the meter to 0.

2. When reading data, place the instrument firmly on the surface of the object being measured. When measuring, do not drag the instrument on the surface under test. Doing so will cause the spring-supported measuring points to wear out, leading to data errors.

3. According to the description or opinions reached by the relevant parties, select enough points in each area that can represent the roughness of the measured surface for testing, and then select at least 10 points in the tested area for testing, and the average of the test values ​​​​of the 10 points The value is the surface roughness of that area.

SP100 Host, Glass, Screw driver, Encasement box, Manual and Certificate

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.