Surface roughness tester KAIRDA NDT110 Metal and Non-metallic parts surface roughness testing instrument

Introduction

KAIDA NDT110 Surface Roughness Tester is the design shape of the aluminum drawing die, according to GB/T 3505-2000 "Geometric Technical Specifications for Product Surface Structure Profile Method Surface Structure Statement, Definition and Parameters" and GB/T 6062-2002 "Product Pocket surface roughness meter designed according to the standard design of "Geometric Quantity Technical Specification (GPS) Surface Structure Profile Method Nominal Characteristics of Contact (Style) Instruments". NDT110 Surface Roughness Tester is suitable for testing the surface roughness of metal and non-metallic parts to be tested. After strict temperature and humidity tests, it is suitable for measurement in high temperature and high humidity environments. NDT110 roughness meter has 4 kinds of measurement parameters: Ra, Rz, Rt, Rq.

Features

1. NDT110 Surface Roughness Meter has a calibration function and is easy to operate.

2. Four measurement parameters Ra, Rz, Rt, Rq can be selected.

3. The calibration sample block of NDT110 roughness meter is made of optical glass substrate, which is certified by the National Metrology Institute. It has high precision, is not easy to scratch, and has a long service life.

4. Adopt high-speed DSP processor for data processing and calculation, with fast speed and higher precision.

5. There are two charging methods: special charger or computer USB interface, which can work while charging, fast and convenient.

6. With automatic shutdown function and low-power hardware and software design, the NDT110 surface roughness meter works for a long time.

7. The appearance is designed by drawing aluminum mold, which is durable and has the ability to resist electromagnetic interference.

8. The sensor probe has a protective door, which can effectively protect the sensor probe and ensure the accuracy of the measurement.

9. Dot matrix LED LCD display, high brightness, no viewing angle, wide temperature, suitable for various occasions.

10. Three sampling lengths of 0.25, 0.80 and 2.50 can be selected.

Applicable field

NDT110 Surface Roughness Meter is suitable for the detection of surface roughness of metal and non-metallic parts to be tested. It is suitable for various machining parts, machining manufacturing, testing, commodity inspection and other departments, especially for on-site inspection of large workpieces and production lines. , as well as inspection, measurement, commodity inspection and other departments of the out inspection, will not cause damage to the workpiece. It can be used to measure planes, outer circular surfaces and conical surfaces with a diameter greater than 20mm (empirical value), and grooves with a length and width greater than 80×30mm.

Show pictures

host x1, calibrating block x1, bracket x1, charger x1, data cable x1, manual x1, certificate x1, warranty card x1, instrument special box x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.