YUZHOU QG-1 Metallographic Specimen Cutting Machine
YuZhou
QG-1
-
YUZHOU QGZ-120 Large Automatic Cutting Machine Should 380 × 2.8 × Should 32 mm
Login -
YUZHOU QGZ-100 large automatic cutting machine, two-axis linkage (Y, Z)
Login -
YUZHOU QG-3 Vertical Low Noise Waterproof Motor, Metallographic Sample Cutting Machine
Login -
YUZHOU QG-3 Desktop Low Noise Waterproof Motor, Metallographic Sample Cutting Machine
Login -
YUZHOU QGZ-90 Automatic Metallographic Specimen Cutting Machine
Login
Introduction
In the process of metallographic sample preparation, cutting of the sample material is the first important step in sample preparation. The QG-1 metallographic sample cutting machine uses a high-speed rotating resin grinding wheel to cut the sample. In order to prevent the sample tissue from being burned during cutting, this machine is equipped with a cooling device that can be connected to an external water source for cooling. This machine is widely used in various metallographic laboratories to cut various metallographic samples. It is extremely convenient to operate, use and maintain.
YuZhou QG-1 Metallographic sample cutting machineSpecifications
| LIST | VALUE |
|---|---|
| Cutting method | Manual, Y direction feed |
| Cutting blade size | Φ300*2*Φ32mm |
| Maximum cutting section | 50*50mm |
| Rotation speed | 2800rpm |
| Motor Power | 2.2kW |
| Cutting fixture | Quick clamp, jaw height 50mm |
| Power | 380V, 50Hz, 8A, three-phase four-wire |
| Dimensions | 740*465*390mm |
| Weight | 70kg |
YuZhou QG-1 Metallographic sample cutting machine Packing list
Host X1, cutting blade (Should 300 × 2 × Should 32mm, Resin abrasive wheels) X2, stay wrench (46mm) X1, hexagonal wrench (8mm) X1, water inlet pipe (Should 10mm) X1, water outlet pipe (Should 32mm) X1, description X1, certificate X1,
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.