FARUI FR-1240-250A Constant Temperature and Humidity Incubator

Introduction

This equipment can be used for bacterial culture, breeding, fermentation and other constant temperature experiments and cultivation in scientific research and industrial production departments such as industrial production, biochemistry and agricultural science.

Scientific air duct design, exquisite production technology, and strong non-standard production capabilities ensure that you can have more suitable drying equipment.

FR-1240 constant temperature and humidity incubator adopts large LCD screen display microcomputer intelligent adjustment technology for temperature control, with automatic display function of measuring temperature and set temperature at the same time, and has the functions of PID adjustment, constant temperature timing and self-tuning, with high temperature control accuracy, strong anti-interference ability and easy operation.

The heating principle adopts the principle of air circulation, so that the temperature distribution in the box is more uniform and the temperature rise is more stable.

The brushed stainless steel liner makes it easier to clean the studio, and the shelves can be set and adjusted in height;

There are exhaust holes in the north of the cabinet and ventilation holes at the bottom, so that the gas volatilized by the experimental object can be discharged from the back.

function

It adopts microprocessor control, and has the functions of monitoring, temperature control and protection. Lighting in the box: The culture in the box can be observed, and the stainless steel liner will not corrode.

peculiarity

1. The outer box of this equipment is cold-rolled steel plate, the surface is electrostatic spraying process, the inner tank is stainless steel, the insulation layer is formed by polyester foam, and the translucent window is made of double-layer insulating glass to ensure the thermal insulation performance in the box (low-temperature incubator and BOD and other incubators that require stainless light have no glass windows), and the box has cold and hot air flow air ducts to make the gas circulation in the box smooth and the temperature more balanced.

2. The system adopts the "zero-crossing" non-contact switch circuit technology, so as to realize the pulse width adjustment heating and refrigeration, so that the temperature control fluctuation range is less than 0.5 °C, and the internal inhomogeneity is about 1.0 °C.

How to use:

1. Conditions of use:

A. Ambient temperature: 10-30°C

B. No strong corrosive gas, good ventilation, relative humidity below 85%.

C. POWER SUPPLY: 220V±10%, 50HZ CAPACITY IS NOT LESS THAN 1KW, AND THERE IS A GOOD GROUNDING WIRE.

2. How to use:

A. Before use, put the ultrasonic atomizer next to the machine, add water to the ultrasonic atomizer, connect the gasification pipeline, and plug the power cord of the ultrasonic atomizer into the three-wire socket behind the right side of the box

B. Stop humidification when the machine is heated

Precautions

1. The humidifier should be used to add water in time, and add water once every 1-2 days according to the humidity requirements to prevent damage. When adding water, remove the power plug of the humidifier, remove the humidifier water storage tank, turn it up and unscrew the water filling seal counterclockwise, add water, and then tighten the seal, put it on the humidifier, and press the humidifier power supply.

2. After the equipment lands, if the ground is uneven, it should be leveled.

3. The general movement of the equipment should move in parallel, and the tilt in either direction should be less than 45 degrees.

(1) During the normal operation of this equipment, the loading in the box should not affect the air circulation, so as to ensure that the temperature in the box is uniform.

(2) The inner tank of the box wall and the surface of the equipment should be rubbed frequently to keep it clean.

4. If not used for a long time, the power cord should be dialed to prevent the equipment from being charged and injured, and it should be operated regularly (generally one quarter) for 2-3 days according to the use conditions to drive out the moisture of the electrical parts and avoid damage to the relevant devices.

Host X1, Shelf X1, Humidifier X1, Manual X1, Certificate X1, Warranty Card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.