SANFA LHP-250EB Constant Temperature and Humidity Incubator -40 ℃/250L

Application

The constant temperature and humidity incubator has a precise temperature and humidity control system. It provides various environmental simulation conditions for industrial research and biotechnology tests. It can be widely used in sterility tests such as pharmaceuticals, textiles, and food processing, stability checks, and Raw material properties of industrial products, product packaging life and other tests.

Features

※Microcomputer LCD temperature and humidity controller, accurate and reliable temperature control and humidity control, with alarm functions for over-temperature, leakage, power failure, and sensor failure.

※Using new fluorine-free design, high efficiency, low energy consumption, uniform temperature distribution and long service life.

※Mirror stainless steel liner is used, with semi-circular arcs at the four corners, easy to clean, and the distance between the shelves in the box is adjustable.

※High-precision, large-capacity humidity generator ensures that humidity control occurs quickly, with high precision and small fluctuations.

※ There is an observation window on the door of the box, and a lighting lamp is installed inside the box, which is convenient for observing the cultures in the box

※With over-temperature, sensor failure, leakage, shutdown protection, door open protection, water shortage alarm, call recovery function;

※ There is an independent temperature limit alarm system, which will be automatically interrupted when the temperature exceeds the limit, ensuring the safe operation of the experiment and no accidents (optional);

※It can be connected to a printer or equipped with RS-485 interface, which can record the changes of temperature and humidity parameters (optional);

※The left side of the box is equipped with a test hole, which is convenient for experimental operation and temperature measurement (optional);

※ Equipped with a built-in humidifier (optional).

Also has intelligent touch screen controller, programmable control. Humidity fluctuation ±5%RH, built-in ultrasonic humidifier, optional RS-485 interface and embedded printer.

Series selection

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.