JINGQI GNP-9080 water-proof incubator
Temperature range of JINGQI GNP-9080 water-proof incubator Room temperature + 5-65 ℃, Temperature stability +/- 0.5 ℃, Temperature resolution +/- 1 ℃, Heating mode water jacket type, liner material stainless steel plate, liner size 400 × 400 × 500 (mm), shelf (standard) 2 pieces.
JingQi
GNP-9080
-
HONGKE DNP-9025A Electrothermal thermostatic incubator Laboratory incubator
$ 231.25 -
TAISITE MJX-250BIII mildew incubator Manual humidity control 250L
$ 1145.00 -
Kenton 303-0A Digital Display Electric Heating Incubator
$ 188.40 -
HONGKE ZHP-250 thermostatic shaking incubator 250L full temperature
$ 1232.24 -
SANFA GNP-9270E Thermostatic incubator LCD/270L
$ 1027.15
Features
The water jacket of the incubator is made of stainless steel argon arc welding, which is durable;
Water jacket structure, accurate and reliable temperature control, no disadvantages of temperature over-balance;
The outer door adopts a fully transparent observation window type, and the contents of the box are clear at a glance;
Digital display temperature control, if the set value in the box is exceeded or the water level in the water jacket is too high or too low, an audible and visual alarm will be automatically issued;
It adopts silicon rubber seal and tempered glass double-layer door leakage prevention device, which is convenient for observation and does not affect the temperature inside the box.
Series
| model | power | studio size | bracket |
| GNP-9050 | 320 | 350*350*400 | 2 |
| GNP-9080 | 470 | 400*400*500 | 2 |
| GNP-9160 | 620 | 500*500*650 | 3 |
| GNP-9270 | 770 | 600*600*750 | 3 |
| Unit: W, mm, pcs | |||
| Other parameters | |||
| voltage | -220V 50Hz | ||
| heating method | Water jacket | ||
| Temperature control range | Room temperature +5-65°C | ||
| temperature resolution | ±1℃ | ||
| temperature fluctuation | ±0.5℃ | ||
JingQi GNP-9080 Waterproof incubatorSpecifications
| LIST | VALUE |
|---|---|
| Temperature range | RT+5-65°C |
| Temperature fluctuation | ±0.5℃ |
| Temperature resolution | ±1℃ |
| Heating method | water jacket |
| Liner material | stainless steel plate |
| Liner size | 400*400*500mm |
| volume | 80L |
| Shelf (std.) | 2pcs |
| Power | 220V、50Hz |
| Outer box material | Good sheet steel |
| Power consumption | 470W |
JingQi GNP-9080 Waterproof incubator Packing list
Host x1, shelf x2, instruction manual x1, certificate x1, warranty card x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
