Netherlands TQC SP1562 coating Roughness Gauge
Rapid measurement of pulse height on rough surfaces of varnished film. Measurement range 0-3,4mm/0-0.13inch.
-
Roughometer extension rod, KAIDA KS55
Login -
DUBAN DB20-SRT231 + sand blasting shot peening surface roughness instrument
2480.0 RMB -
DUBAN DB20-SRT231 sand blasting shot peening surface roughness instrument
2230.0 RMB -
Germany HTechMT SP200 Digital Roughness Gauge accuracy up to 1um
4640.0 RMB -
IPRE SR400 Roughometer OLED Digital Display
4180.0 RMB
Picture show
Introduction
The TQC SP1562 roughness meter is simple to measure and can quickly measure the pulse height of the rough surface.
Technical Parameters
model | SP1562 |
Measuring range | 0-3,4mm/0-0.13inch |
resolution | 1um/0.04mil |
Accuracy | ± 5µm / 0.2 mil |
stent diameter | 20 mm / 0.79 inch |
Battery | Type LR44 1.5 V |
,
Actual pictures
Take you into the Dutch TQC
TQC SP1562 Coating Roughness GaugeSpecifications
LIST | VALUE |
---|---|
Measurement range | 0~3,4mm/0~0.13inch |
Resolution | 1μm |
Accuracy | ± 5µm / 0.2 mil |
bracket diameter | 20 mm / 0.79 inch |
Power | Type LR44 1.5 V |
TQC SP1562 Coating Roughness Gauge Packing list
Roughness Gauge x1, Encasement Bag x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
TQC SP1562 Coating Roughness Gauge Comment
FAQ
- Tide Review: Cylindrical Bending Tester SP1820
- Operation method steps of small coating machine in TQC laboratory in the Netherlands
- Netherlands TQC SP0500 swing rod hardness tester specific operation method
- How to install and set up the Netherlands TQC SP0500 Swing Bar Hardness Tester?
- TQC Pencil Hardness Tester Instruction Manual
- TQC RV2100 Digital Display Thermohygrometer Instruction Manual
- How to use TQC SP1830 cone shaft bending tester
- Netherlands TQC SP1570 Copy Tape Tester Operation Manual
- TQC Paint Film Impact Tester Operation Instructions
- The specific operation method of TQC SP1820 cylindrical bending tester