Netherlands TQC SP1690 Single Cross Hatch Cutter Set, Single Blade CC2000 Series
6 teeth, tool tooth spacing 1mm, instrument material vacuum hardened stainless steel, aluminum, rubber, application standard ISO2409, ASTM D3359, suitable for film thickness environment 0~ 60µm (solid substrate), 0~ 50μm (solid substrate)
-
Netherlands TQC SP1706 cross-cut cutter head 11 teeth, spacing 1.5mm for CC2000/CC3000 series
1580.0 RMB -
Netherlands TQC SP1702 cross-cut cutter head 6 teeth, pitch 1mm for CC2000/CC3000 series
1490.0 RMB -
Netherlands TQC SP1703 cross-cut cutter head 6 teeth, spacing 2mm for CC2000/CC3000 series
1490.0 RMB -
Netherlands TQC SP1705 cross-cut cutter head 11 teeth, spacing 1mm Suitable for CC2000/CC3000 series
1580.0 RMB -
Netherlands TQC SP1704 cross-cut cutter head 6 teeth, spacing 3mm for CC2000/CC3000 series
1490.0 RMB
Picture show
Introduction
TQC CC2000 Single Scratch Adhesion Meter Series includes SP1690, SP1691, SP1692, SP1699, SP1700 five models, with a retainer design, can automatically adjust the blade, with a rotating handle, so that the pressure on the blade is equalized, without the need for additional tools to change the cutter. TQC's single scratcher is imported from the Netherlands and has tools that can be used for different coating film thicknesses and substrate adhesion tests according to the standard. Each set of paint adhesion testers consists of a lightweight, comfortable handle, a tough knife, and easy to carry. Also included are brushes, small magnifying glasses, and adhesive tape.
Related supporting productsItem【Sold separately】
SP9700 Illuminated Magnifier 2.5x
SP1710 nylon brush is used for adhesion testing
SP3010 adhesive tape, three rolls, with an adhesion of 4.3 N/cm
SP3020 tape, one roll, with an adhesion of 7.6 N/cm
SP3007 tape, one roll, has an adhesion of 4.3 N/cm
The principle of the scratcher experiment
TQC brand paint adhesion tester adopts the scratch method, which is internationally recognized as the easiest and most effective test method for testing adhesion. The adhesion of the sample can be quickly measured by simply performing a series of different cuts on the substrate, dry coating, and paint.
The grid method simply means that a row of 6/11 blades between the two outer wires of the adhesion tester is used to cut out two vertically crossed parallel lines to obtain 25 or 100 squares, and then used in the intersection area of the parallel lines, and then treated with a stiff brush for a short time or treated with tape on a hard substrate to evaluate the adhesion.
Product detail drawing
Comparison table of the full range of models of adhesion testers
TQC | Knife teeth | CC1000 | CC2000 | CC3000 | Suitable for film thickness environments |
Scratch lattice adhesion instrument | - | The blade holder is automatically adjusted, and the round cutter has 8 cuts | The blade holder is automatically adjusted, the cutter can be easily changed, and the swivel handle is included, eliminating the need for additional tools | The blade holder maintains a fixed distance between the varnish surface and the two auxiliary wheels, and the cutting depth can be precisely adjusted to ensure repeatability | - |
ISO2409/ASTM D3359 | 1 | VF1839 | SP1690 | SP1680 | ISO2409: 0~60μm (sturdy substrate); ASTM D3359: 0~50μm (Robust Substrate) |
ISO2409/ASTM D3359 | 2 | VF1842 | SP1691 | SP1681 | ISO2409: 0~60μm (soft substrate), 61-120μm(Sturdy substrate.)); ASTM D3359:50~125μm (Solid Substrate) |
ISO/DIN2409 | 3 | VF1844 | SP1692 | SP1682 | 121-250μm(Sturdy substrate.)) |
ASTM 3359<2009 | 1 | VF1846 | SP1699 | SP1683 | 0~50μm(Sturdy substrate.)) |
ASTM 3359 is less than 2009 | 1.5 | VF1847 | SP1700 | SP1684 | 50~125μm(Sturdy substrate.)) |
Take you to the Dutch TQC
TQC SP1690 Single Cross Hatch CutterSpecifications
LIST | VALUE |
---|---|
Number of teeth | 6 teeth |
Tooth spacing | 1mm |
Instrument material | Vacuum hardened stainless steel, aluminum, rubber |
Application standard | ISO2409、ASTM D3359 |
Applicable film thickness environment | 0~ 60μm (solid substrate), 0~ 50μm (solid substrate) |
Appearance size | 32*173*42mm |
Instrument weight | 238g |
TQC SP1690 Single Cross Hatch Cutter Packing list
Cross Hatch Cutter (including steel knife, handle) x1, 3M tape x1, brush x1, magnifying glass x1, Encasement box x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
TQC SP1690 Single Cross Hatch Cutter Comment
FAQ
- Tide Review: Cylindrical Bending Tester SP1820
- Operation method steps of small coating machine in TQC laboratory in the Netherlands
- Netherlands TQC SP0500 swing rod hardness tester specific operation method
- How to install and set up the Netherlands TQC SP0500 Swing Bar Hardness Tester?
- TQC Pencil Hardness Tester Instruction Manual
- TQC RV2100 Digital Display Thermohygrometer Instruction Manual
- How to use TQC SP1830 cone shaft bending tester
- Netherlands TQC SP1570 Copy Tape Tester Operation Manual
- TQC Paint Film Impact Tester Operation Instructions
- The specific operation method of TQC SP1820 cylindrical bending tester
- ActiveGB 10810.4-2012
- ActiveGB/T 9286-2021
- AbolishTB/T 2260-1991
- ActiveHG/T 20720-2020
- ActiveHG/T 5776-2020
- ActiveHG/T 5187-2017
- ActiveHG/T 5299-2018
- ActiveHG/T 3829-2006
- ActiveASTM D3359-2023
- ActiveISO 2409-2020
- ReplacedGB/T 9286-1998
- ActiveASTM D6677-2022
- AbolishISO 2409-1992
- ActiveHG/T 2003-1991
- ActiveHG/T 2244-1991
- ActiveHG/T 2243-1991
- ActiveHG/T 2005-1991
- ActiveQB/T 1551-1992
- ActiveQB/T 2183-1995
- ActiveJB/T 7663.2-2007