Netherlands TQC SP3200 dust test kit for evaluating the size and size of surface dust
The size and size of surface dust can be evaluated according to ISO 8502-3, and the test suite is consistent with the advantages of BS EN ISO 8502-3, both during passing tests and during the permanent recording of dust presence.
-
ERICHSEN erichsen 295/II Cross Hatch Cutter Set 6 teeth/2mm
5800.0 RMB -
Netherlands TQC SP3020 adhesion tape 3M adhesion 7.6 N/cm
470.0 RMB -
UK ELCOMETER Elcometer 107/1 F10713348-2 Cross-cut adhesion instrument, complete set with ASTM tape
2890.0 RMB -
German HTechMT AT100-6A adhesion cutter ASTM standard set with 6 * 1 blade
2280.0 RMB -
Netherlands TQC SP1704 cross-cut cutter head 6 teeth, spacing 3mm for CC2000/CC3000 series
1490.0 RMB
Picture show
product description
The TQC SP3200 dust test kit can assess the size and size of surface dust in accordance with ISO 8502-3 in preparation for spraying.
Dust on clean surfaces will affect the paint's ability to adhere, causing premature damage or substandard coatings.
The test suite is consistent with the advantages of BS EN ISO 8502-3, both in terms of passability testing and durability recording of the presence of dust.
Product parameters
model | SP3200 |
application | Assess the size and size of surface dust |
Standard accessories | Dust comparison display panel and box, dust assessment reference chart, illuminated magnifying glass with lens, tape and a set of test record sheets. |
Applications
Take you into the Dutch TQC
TQC SP3200 Dust test kitSpecifications
LIST | VALUE |
---|---|
application | Assess the size and size of surface dust |
Standard Accessories | Dust comparison display panel and case, dust assessment reference diagram, illuminated magnifying glass with lens, tape and a set of test log sheets |
TQC SP3200 Dust test kit Packing list
Dust test kit x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
TQC SP3200 Dust test kit Comment
FAQ
- Tide Review: Cylindrical Bending Tester SP1820
- Operation method steps of small coating machine in TQC laboratory in the Netherlands
- Netherlands TQC SP0500 swing rod hardness tester specific operation method
- How to install and set up the Netherlands TQC SP0500 Swing Bar Hardness Tester?
- TQC Pencil Hardness Tester Instruction Manual
- TQC RV2100 Digital Display Thermohygrometer Instruction Manual
- How to use TQC SP1830 cone shaft bending tester
- Netherlands TQC SP1570 Copy Tape Tester Operation Manual
- TQC Paint Film Impact Tester Operation Instructions
- The specific operation method of TQC SP1820 cylindrical bending tester
- ActiveGB/T 42541-2023
- ActiveHG/T 2006-2006
- ActiveGB/T 9286-2021
- ActiveHG/T 5776-2020
- ActiveHG/T 5187-2017
- ActiveHG/T 3829-2006
- ActiveASTM D3359-2023
- ReplacedGB/T 9286-1998
- ActiveASTM D6677-2022
- AbolishISO 2409-1992
- ActiveHG/T 2003-1991
- ActiveGB/T 7788-2007
- ActiveJB/T 7663.2-2007
- ActiveJB/T 6886-2010
- ActiveJB/T 5000.12-2007
- ActiveGB/T 8923.1-2011
- AbolishGB/T 9286-1998