LD-BL-A 180 ° Peel strength tester
The LD-BL-A180 ° Peel strength tester has a capacity of 0-50kg, an accuracy level of 0.5, a maximum load of 10KG, an effective force measurement range of 0.02/100-100%, and a maximum load 250,000 code for test force resolution. The LD-BL-A180 ° Peel strength tester adopts an all-digital closed-loop control system, which can realize constant stress, constant strain, constant displacement and test functions.
Introduction
The 180° peel strength testing machine is specially used for tensile testing and tensile strength testing of plastics, non-woven fabrics, leather, cloth-based zippers and other products. It can be used for coatings, plastic films, composite films, and soft packaging with different fixtures. Materials, adhesives, adhesive tapes, self-adhesives, rubber, paper, and other products are subjected to tensile tests, tensile strength and elongation, breaking force and elongation, right-angle tearing, heat seal strength, tear strength , 180°peel strength (including T-type), 90°peel, anti-puncture test and other items testing.
Standards
GB/T2792 adhesive tape peel force test standard; ASTM D3330,
Test Methods
1. Fold the free end of the sample 180 degrees in half, and peel it off from the test plate, the adhesive surface is 25mm. Clamp the free end of the sample and the test plate on the upper and lower clamps. The peeling surface should be consistent with the force line of the test machine. The testing machine peels continuously at a peeling speed of 300mm/min±10mm, and an automatic recorder draws the peeling curve (GB/T2792-1998 adhesive tape peeling force test standard).
2. Test result: calculated according to the distance between 20-80mm after stripping.
3. Within the peeled duty range, read a number every 20mm, at least 4 numbers must be read. Find its average.
4. Printed report with A4 paper size, with various curve analysis.
5. Can distinguish the maximum value, minimum value and average value in a sample.
6. After the test is completed, it can calculate the results of different intervals and take point analysis.
JingHuaYiQi LD-BL-A (180°/50kg) 180 ° Peel strength testerSpecifications
LIST | VALUE |
---|---|
Capacity selection | 0~50kg;(2kg,5kg,10kg,20kg,30kg,50kg,100kg,200kg |
Accuracy class | Level 0.5 |
Maximum load | 10KG |
Force Measurement range | 0.02/100-100% |
Test force resolution | The maximum load 250,000 code; the inside and outside are not divided into gears, and the whole resolution remains unchanged |
Effective test width | 100mm |
effective travel | 400mm |
Test speed range | 5~500mm/min |
Speed accuracy | ±0.5% |
Displacement measurement accuracy | Within ± 0.5% of the indication |
Acquisition sensing method | High Precision Sensors |
Control system | Stepper motor + stepper driver |
Test bench lifting device | Computer digital control/manual jog control |
Test bench safety protection device | Software automatic diagnosis, electronic limit |
re-test | Manual can return to the initial position of the test at the highest speed, and automatic can return automatically after the test is over |
Fixture configuration | Customized according to user product sample requirements |
motor | 400W |
Weight | About 55kg |
JingHuaYiQi LD-BL-A (180°/50kg) 180 ° Peel strength tester Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Influence Factors and Test Methods of Bond Strength
- Technical analysis of film 180 ° peel strength test
- IncomingGB/T 44749.2-2024
- IncomingGB/T 44749.1-2024
- ActiveHG/T 5751-2020
- ActiveQB/T 4449-2013
- ActiveHG/T 2406-2014
- ActiveGB/T 31379-2015
- IncomingGB/T 42921-2023
- ActiveGB/T 22378-2008
- ActiveGB/T 5754-2020
- ActiveHG/T 3948-2007
- ActiveHG/T 4914-2016
- ActiveYY/T 0148-2006
- ActiveASTM D6252/D6252M-2019
- ActiveASTM D3330/D3330M-2018
- ActiveGB/T 2792-2014
- ActiveGB/T 7706-2008
- AbolishHG/T 3658-1999
- ActiveQB/T 2422-1998