Search
    Cart(0)
      总价
      前往结算
      您的购物车是空的 : )
      Home> Peel Strength Tester> JingHuaYiQi> JingHuaYiQi LD-BL-A (180°/100kg) 180 ° Peel strength tester

      LD-BL-A 180 ° Peel strength tester

      The LD-BL-A180 ° Peel strength tester has a capacity of 0-100kg, an accuracy level of 0.5, a maximum load of 10KG, an effective force measurement range of 0.02/100-100%, and a maximum load 250,000 code for test force resolution. The LD-BL-A180 ° Peel strength tester adopts an all-digital closed-loop control system, which can realize constant stress, constant strain, constant displacement and test functions.

      Brand
      SKU: NB033272
      China JingHuaYiQi
      Stock
      Loading…
      Price
      $ 1544.41
      Promotion
      Service
        Service
        The delivery and service By NBchao.Com
        VS
        Genuinegoods
        • JingHuaYiQi LD-BL-A (180°/100kg) 180 ° Peel strength testerOverview

        • Specifications
        • Comments
        • FAQs
        LD-BL-A (180°/100kg)
        180 ° Peel strength tester

        Introduction

        The 180° peel strength testing machine is specially used for tensile testing and tensile strength testing of plastics, non-woven fabrics, leather, cloth-based zippers and other products. It can be used for coatings, plastic films, composite films, and soft packaging with different fixtures. Materials, adhesives, adhesive tapes, self-adhesives, rubber, paper, and other products are subjected to tensile tests, tensile strength and elongation, breaking force and elongation, right-angle tearing, heat seal strength, tear strength , 180°peel strength (including T-type), 90°peel, anti-puncture test and other items testing.

        Standards

        GB/T2792 adhesive tape peel force test standard; ASTM D3330,

        Test Methods

        1. Fold the free end of the sample 180 degrees in half, and peel it off from the test plate, the adhesive surface is 25mm. Clamp the free end of the sample and the test plate on the upper and lower clamps. The peeling surface should be consistent with the force line of the test machine. The testing machine peels continuously at a peeling speed of 300mm/min±10mm, and an automatic recorder draws the peeling curve (GB/T2792-1998 adhesive tape peeling force test standard).

        2. Test result: calculated according to the distance between 20-80mm after stripping.

        3. Within the peeled duty range, read a number every 20mm, at least 4 numbers must be read. Find its average.

        4. Printed report with A4 paper size, with various curve analysis.

        5. Can distinguish the maximum value, minimum value and average value in a sample.

        6. After the test is completed, it can calculate the results of different intervals and take point analysis.


        VS

        JingHuaYiQi LD-BL-A (180°/100kg) 180 ° Peel strength testerSpecifications

        LIST VALUE
        Capacity selection 0~100kg;(2kg,5kg,10kg,20kg,30kg,50kg,100kg,200kg
        Accuracy class Level 0.5
        Maximum load 10KG
        Force Measurement range 0.02/100-100%
        Test force resolution The maximum load 250,000 code; the inside and outside are not divided into gears, and the whole resolution remains unchanged
        Effective test width 100mm
        effective travel 400mm
        Test speed range 5~500mm/min
        Speed accuracy ±0.5%
        Displacement measurement accuracy Within ± 0.5% of the indication
        Acquisition sensing method High Precision Sensors
        Control system Stepper motor + stepper driver
        Test bench lifting device Computer digital control/manual jog control
        Test bench safety protection device Software automatic diagnosis, electronic limit
        re-test Manual can return to the initial position of the test at the highest speed, and automatic can return automatically after the test is over
        Fixture configuration Customized according to user product sample requirements
        motor 400W
        Weight About 55kg

        JingHuaYiQi LD-BL-A (180°/100kg) 180 ° Peel strength tester Packing list

        complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

        [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

        FAQ

        [Q]
        Does this Peel strength tester have overload protection?
        [A]
        Hello, yes, you can set the maximum load value for automatic protection.
        [Q]
        Help me find a Peel strength tester that meets ASTMD6252/D6252M standards
        [A]
        This JH-BL-A (180 °/100kg) Peel strength tester is fine!
        JingHuaYiQi
        LD-BL-A 180 ° Peel strength tester
        Service
        Focus on online sales of Lab Testing Instruments