Defelsko positector SPG1 Roughometer

Standard SPG1-ESurface roughness measuring instrument

Defelsko The positector SPG Surface Roughness Gauge, model number Standard SPG1-E, is the standard model of the SPG series and is a built-in stylus typeSurface profile roughness measuring instrument.Standard SPG1-EThe roughness gauge is designed to test sandblasted steel, to measure and record the surface profile roughness,SPG1Roughness measuring instrumentThe thickness range of measurement is 0~500 microns.

Standard SPG1Illustration of the surface profile gauge

Apply standards

Complies with standards ASTM D4417-B, SSPC-PA17, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772, etc

positector SPG1 roughness gauge features:

1) Simple

With a fast measurement speed of more than 50 readings per minute, it is suitable for fast and accurate measurement of the surface roughness of large, flat surface areas

Enhanced one-handed menu navigation

The reset function enables an immediate factory reset

2) Durable

Alumina wear surface and tungsten carbide stylus tip for long life and continuous accuracy – field replaceable

Resistant to solvents, acids, oils, water and dust – weather-resistant

Rugged, outdoor/indoor instrument - excellent for use in the field or factory

Shock-absorbing rubber protective holster, belt clip and wrist strap

The main unit and probe are guaranteed for two years

3) Precise

Built-in temperature compensation ensures accurate measurements

The calibration certificate is traceable to the PTB

Contains glass calibration zero plate and metal gasket

Complies with national and international standards such as ASTM D4417 Method B and SSPC-PA17

4) Multi-purpose

Compatible with all Positector 6000, 200, DPM, UTG, RTR, and SPG probes, the positector panel can easily go from a layer thickness gauge to a dew point gage, surface profile gage, or powder wall thickness gage.

Comparison of parameters of the Defelsko Positector SPG series

Model	SPG	SPG S	SPG CS
Standard model	SPG1	SPG S1	SPG CS1
Premium model	SPG3	SPG S3	SPG CS3
probe	PRBSPG	PRBSPGS	PRBSPGCS
apply	Sandblasted steel		Textured paint
Measuring range	0~500 μm (0~20 mils)		0~1500 μm (0~60 mils)
precision	± (5 μm+5%)  ± (0.2mil+5%)
Stylus end angle	60 degrees		60 degrees
Stylus end radius	50μm (2mils)		500μm (20mils)

Host x1, Glass zero adjusting plate x1, metal gasket x1, protective rubber cover and belt clip x1, wristband x1, battery x3, manual x1, nylon bag and shoulder strap x1, mirror protective film x1, calibrate certificate x1, USB cable x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.