Defelsko SPG3-E advanced surface roughness meter, image Linear dispersion 500 μm range

Overview of the Positector SPG Surface Roughness Tester

Defelsko Positector SPG series surface roughness tester, that is, surface profile measuring instrument, is divided into two types: advanced type and standard type, this SPG3 surface roughness tester is:The advanced version of the Positector SPG series is not only high-resolutioncoloredLCD screen, but also able to store 100,000 measurement data, and can:displayReal-time graphics and picture prompts, it is a high-end digital display surface roughness tester.The Positector SPG3 surface roughness tester has a measuring range of:0~500 μm, the stylus angle is 60 degrees.

Positector SPG3Advantages of Surface Roughness Testers:

Positector SPG3Surface roughness tester features

1) Positector host has wide compatibility and can beCompatible with all Positector 6000, 200, DPM, UTG, RTR, and SPG probes.

2) HaveBuilt-in temperature compensation ensures accurate measurements

3）The measurement speed is fast, with more than 50 readings per minute

4）Contains glass calibration zero plate and metal gasket

5) Comply with national and international standards, such as ASTM D4417 Method B and SSPC-PA17

6）Alumina wear surface and tungsten carbide stylus tip for long life and continuous accuracy – field replaceable

7) One-handed operation, navigational menu interface

8) The shell has a high level of protection and can be preventedSolvents, acids, oils, water and dust – weatherability

9) It can be connected to Positector software for data management, etc

Comparison of parameters of the Defelsko Positector SPG series

Model	SPG	SPG S	SPG CS
Standard model	SPG1	SPG S1	SPG CS1
Premium model	SPG3	SPG S3	SPG CS3
probe	PRBSPG	PRBSPGS	PRBSPGCS
apply	Sandblasted steel		Textured paint
Measuring range	0~500 μm (0~20 mils)		0~1500 μm (0~60 mils)
precision	± (5 μm+5%)  ± (0.2mil+5%)
Stylus end angle	60 degrees		60 degrees
Stylus end radius	50μm (2mils)		500μm (20mils)

Host x1, Glass zero adjusting plate x1, metal gasket x1, protective rubber cover and belt clip x1, wristband x1, battery x3, manual x1, nylon bag and shoulder strap x1, mirror protective film x1, calibrate certificate x1, USB cable x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.