Defelsko SPG S1 split Roughness Gauge

Introduction to the SPGS1 Split Roughness Tester

Unlike the SPG series, the Defelsko SPG S-Series Surface Roughness Tester is a split probe type, in that the main unit and probe are separated, making it easy to measure the surface roughness of some hard-to-access areas. positector SPG S1The surface profiler is a standard type with a high-resolution color LCD display that can store 250 measurement readingsSandblasted steel industry tested.

Illustration of the SPGS1 split surface profiler

SPGS1 Split Surface Profiler Features

1) The data storage capacity is 250 readings

2）With a fast measurement speed of over 50 readings per minute, it is suitable for fast and accurate surface roughness measurements in large, flat areas

3）Alumina wear surface and tungsten carbide stylus tip for long life and continuous accuracy – field replaceable

4) MatchingShock-absorbing rubber protective holster, belt clip and wrist strap

5）Built-in temperature compensation ensures measurement accuracy

6）The calibration certificate is traceable to the PTB

7) Contains glass calibration zero plate and metal gasket

8) The host is multi-purpose,Compatible with all Positector 6000, 200, DPM, UTG, RTR, and SPG probes, the positector panel can easily go from a layer thickness gauge to a dew point gage, surface profile gage, or powder wall thickness gage.

Comparison of parameters of the Defelsko Positector SPG series

Model	SPG	SPG S	SPG CS
Standard model	SPG1	SPG S1	SPG CS1
Premium model	SPG3	SPG S3	SPG CS3
probe	PRBSPG	PRBSPGS	PRBSPGCS
apply	Sandblasted steel		Textured paint
Measuring range	0~500 μm (0~20 mils)		0~1500 μm (0~60 mils)
precision	± (5 μm+5%)  ± (0.2mil+5%)
Stylus end angle	60 degrees		60 degrees
Stylus end radius	50μm (2mils)		500μm (20mils)

Host x1, Glass zero adjusting plate x1, metal gasket x1, protective rubber cover and belt clip x1, wristband x1, battery x3, manual x1, nylon bag and shoulder strap x1, mirror protective film x1, calibrate certificate x1, USB cable x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.