YINUO YN-SLY16 Microcomputer Tear Degree Tester 0-1000mN/63 * 50mm
YINUO YN-SLY16 microcomputer tearing degree tester is suitable for tearing degree measurement of various types of paper, and can also be used for tearing strength detection of low-strength Cardboard, Spinning & weaving products, leather, film and other sheet composite tear strength, YN-SLY16 microcomputer tearing degree tester Tear arm 104 +/- 1mm, tearing initial angle 27.5 +/- 0.5 °, tearing distance 43 +/- 0.5mm.
YiNuo
YN-SLY16
Instrument use
YN-SLY16 Microcomputer Tear Tester is used to test the force value required to tear a certain amount of pre-slit paper. The instrument uses an optical encoder to measure the angular position of the pendulum tearing, and this test Quantities are converted to tear units. It is suitable for the determination of the tearing strength of various papers, and it can also be used for the tear resistance test of sheet composite materials such as low-strength cardboard, textiles, leather, films, etc. It is suitable for paper mills, scientific research institutions and quality inspection departments.
Principle
The Principle of the paper tearing tester: a stack of samples (usually 4 layers) with a specified pre-cut, lift the pendulum to a certain height so that it has a certain potential energy, when the pendulum swings freely, use its own stored energy to The specimen is torn apart by a fixed distance, and the potential energy loss of the pendulum is used to measure the work done in the process of tearing the specimen.
Executive standard
GB/T 455, QB/T 1050, ISO 1974, JIS P8116, TAPPI T414
YiNuo YN-SLY16 Microcomputer tear testerSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | File A: (50~ 8000) mN, File B: (8000~ 16000) mN |
| Tear arm | 104±1mm |
| Tear initial angle | 27.5±0.5° |
| Tear distance | 43±0.5mm |
| incision length | 20mm |
| Longitudinal displacement of incision | 8mm |
| Paper surface size | 25*15mm |
| Maximum clamping area | 6.48cm2 |
| Clamping torque ratio | 2.2:0.7 |
| number of free pendulums | min≥20，mid≥25,stand≥35. |
| Cutter arm ratio | 14：5.5 |
| tear offset | Less than the knife edge extension wire 10mm |
| Distance between paper jacks | 2.8±0.3mm |
| Human Machine Interface | 3.2In LCD display, modular integrated thermal function |
| Dimensions | 450*380*550mm |
| Weight | About 30kg |
YiNuo YN-SLY16 Microcomputer tear tester Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Paper tearing determination - Alimendorf method and instrument operation guide
- Test method for tensile strength of fabrics
- Specific manufacturing method of synthetic paper
- What is tearing degree? What are the factors that affect tearing degree?
- Test method and principle of LW tearing tester
- What is the degree of tearing of paper?
- Tear tester of paper strength
- Several common paper testers
- What is the tear strength of the fabric? What is acceptable?
- How to install a tear tester in 5 easy steps?
- IncomingGB/T 28210-2024
- ActiveQB/T 1050-2012
- ActiveGB/T 34722-2017
- ActiveGB/T 13519-2016
- ActiveJJG (轻工)63-2000