BIOFIL Puro50 laboratory pure water system, three-stage water 50L/H water storage tank 30L
The productivity of the Puro50 laboratory pure water system is 50L/hr at 15 ℃, the organic matter removal rate is 98%, the bacterial retention rate is > 99%, the water supply pressure of the Puro50 laboratory pure water system is 0.1-6bar, and the storage tank capacity is 30L.
-
LEICI UPW-N30UV Ultrapure Water System
$ 2590.00 -
FLOM FBC2002 Laboratory Ultrapure Water System
Login -
TIANMA UPTM-C20 desktop ultrapure water mechanism water volume 20L/H
$ 3534.40 -
Geno20 laboratory pure water system
$ 5323.73 -
TIANMA UPTM-C60 Vertical ultrapure water mechanism Water volume 60L/H
$ 4605.71
Introduction to Puro pure water system
By using high-recovery reverse osmosis (RO) technology, Puro can effectively remove 99% of the pollutants in the supply water (here refers to tap water), and the pure water produced is called primary water (dish grade water). Puro supplies pure water directly to glassware washers and other laboratory .
Puro can produce 10-1000 liters of industrial grade water/RO water per day
Ro water is suitable for providing water for glassware washing machines, autoclaves, steam generators and incubators, etc. It can also be used to prepare higher levels of pure water. The built-in booster pump simplifies the installation steps, and at the same time avoids the reduction of pure water output and damage to the filter consumables due to the pressure difference of the supply water inflow.
Features
low running cost
Pure water replenishment rate 10-80 liters/hour
New recirculation system extends RO membrane life
Can be mounted on benches, walls and on top of storage tanks
Water storage tanks are available in different volumes: 30 liters, 60 liters and 100 liters
Filters are easy to replace
Environmental friendly
Due to the innovative configuration of the RO membrane, the Puro has up to 50% water recovery and produces less waste water.
After the conductivity is measured, the water that does not meet the requirements is not directly discharged , but is returned to the system to continue circulating and filtering.
Puro 10 | Puro 20 | Puro 50 | Puro 80 | |
Productivity at 15°C | 10l/hr | 20l/hr | 50l/hr | 80l/hr |
Organic matter removal rate | 98% | |||
Bacterial retention | >99% | |||
particle retention | >99% | |||
water pressure | 0.1~6bar |
BIOFIL PUR000050 Laboratory pure water systemSpecifications
LIST | VALUE |
---|---|
Productivity at 15 ℃ | 50L/hr |
Organic matter removal rate | 98% |
bacterial retention rate | >99% |
particle retention rate | >99% |
water supply pressure | 0.1-6bar |
Water storage tank capacity | 30L |
BIOFIL PUR000050 Laboratory pure water system Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveGB/T 44184-2024
- ActiveHG/T 3982-2007
- ActiveCJ/T 168-2002
- ActiveGB/T 41899-2022
- ActiveGB/T 33401-2016
- ActiveHG/T 5776-2020
- ActiveCY/T 205-2019