KEXIN QAG sagging tester film thickness range 50-675μm execution standard GB9264-88

Glass plate size 200 × 120 × (2~ 3) mm, scale interval 25 μ m, film thickness range 50~ 675 μ m, execution standard GB9264-88.

Brand

SKU: NB000370

KeXin

Model

Price

1800.0

Promotion

Service

The delivery and service By NBchao.Com

Service

Get Quote

KeXin shopSE

Information

SPEC RFQ Con

What else did others buy

MODERNER LG-5 sag tester 850-1075μm

680.0 RMB
Shibo Weiye QAG Anti-Sag Meter Set, Determination of paint relative sag

1500.0 RMB
QAG 450-675 Stainless Steel Anti-Sag Meter YONGLIDA Film thickness 450~ 675μm

499.0 RMB
TRUIT TR 3060/5 Anti-Sag Meter

450.0 RMB
Huinuo Intelligent SAG 450-675μm Coating Anti-Sag Meter Sag Coating Machine

620.0 RMB

Genuinegoods

KeXin QAG SAG testerOverview
Specifications
Comments
FAQs

QAG

SAG tester

Glass plate size 200 × 120 × (2~ 3) mm, scale interval 25 μ m, film thickness range 50~ 675 μ m, execution standard GB9264-88.

Picture show


	QAG SAG tester

Introduction

Use a scraper to prepare strip-shaped wet films with different film thicknesses on the glass test plate, and immediately place them vertically in a state of "thin at the top and thick at the bottom". Maximum thickness expressed in μm

Specifications

model	QAG
use	Determination of relative sagging of paints
Glass test plate size	200×120×(2－3)mm
film thickness gradient	25μm
Film thickness range	50－675μm
Executive standard	GB9264-88

KeXin QAG SAG testerSpecifications

LIST	VALUE
purpose	Determination of relative sagging of Paints
Glass panel size	200×120×（2~3）mm
Scale interval	25μm
Film thickness range	50~675μm
Execution standards	GB9264-88

KeXin QAG SAG tester Packing list

SAG tester x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

KeXin QAG SAG tester Comment

Likes 100%

Non-default

No relevant comments

FAQ

[Q]

Is there an ASTMD4400 standard sag tester?

[A]

This KEXIN sag sex tester is fine!

[Q]

What is the use of the blue thing at the bottom in the picture?

[A]

Hello, the bright plate is placed on the test piece during the experiment, and the Anti-Sag Meter is used for the experiment; then the test piece is placed on the blue base to see its sag sex, thank you.

[Q]

What is the film thickness layer of the QAG sagging instrument?

[A]

Hello, it's 25 microns.

[Q]

Does the QAG sag sex tester conform to the national standard GB9264-88?

[A]

Hello, yes, this QAG sag tester is developed according to the GB9264-88 standard, and the measurement film thickness range is 50~ 675 μm.

+KeXin QAG SAG tester Big data

+KeXin QAG SAG testerSimilar products