Small Force Gauge HF-500 Hypertherm with Built-in Sensors +/- 0.5%
Built-in Sensors, Display 500N, 50kg, 110lb, Maximum Measured value 0.1N, 0.01kg, 0.01lb, error of indication +/- 0.5%, unit Kgf, N, Lbf.
HBO
HF-500
HF-20
HF-100
HF-200
HF-1k
HF-5k
HF-10K
product description
HF-500 small push-pull force gauge is a built-in sensor type push-pull force gauge, the corresponding maximum load value is 500N, has the same working environment, indication error, unit, ADC conversion speed, etc. The power supply required for the work of the push-pull dynamometer, LCD digital display, can view the test data in real time, and can optimize the experimental operation in time.
The small push-pull gauge HF-500 has a communication interface, can be connected to a printer to print data, and supports the first peak hold mode, which can be freely switched among N, kgf, and lbf without manual conversion.
Features
1. The unique function of holding the first peak during the test.
2. HF-500 small push-pull gauge has unique key action force and rebound force test.
3. The neutral acceleration value can be set.
4. The accuracy and resolution are very high, and the sampling speed can be as high as 960HZ.
5. Freely set the upper and lower deviation values, automatic sound alarm and level signal output.
6. Display the test direction (pull +, push -).
7. Serial port communication, computer display force value curve, force value table and other display methods, and data processing, such as statistical analysis.
8. Automatic shutdown without operation (freely set the time from 0 to 99 minutes).
9. Peak hold and peak release functions (can be set from 0 to 99 seconds).
10. HF-100/200/500 small push-pull force gauge adopts dot-matrix liquid crystal display and green backlight screen.
11. With large-capacity storage function, it can store 200 sets of test data, and automatically calculate the average value, minimum value and maximum value of the stored data.
12. The operation interface can be displayed in Chinese or English, and the displayed test content can be flipped 180 degrees, which is convenient for multi-angle measurement.
13. Serial port output, which can print the stored test data and the maximum, average and minimum values.
Show pictures
Test instruction
1. Set the measurement mode, force value unit, etc. first.
2. After setting the basic parameters, start the test, firmly hold the push-pull gauge with both hands, and keep the direction of the push or pull force consistent with the axis of the test rod during the test.
3. After the test is completed, unload the load slowly, turn off the power of the HF-500 small push-pull gauge, remove the test head, clean the push-pull gauge and all parts and put them back into the toolbox for the next use.
patent certificate
HBO HF-500 Force Gauge (Digital Display)Specifications
| LIST | VALUE |
|---|---|
| Display type | 500N；50kg；110lb |
| Load scale interval | 0.01N；0.01Kg；0.01lb |
| Sensors structure | Built-in/external optional |
| test head | Male thread M6 |
| Precision level | Level 0.5 |
| error of indication | ≤±0.5% |
| power supply | Lithium Battery: 3.7V/1000mAh |
| unit | N、KN、Kgf、gf、lbf、tf |
| Charger | AC Input：220V/50HZ、DC Output：5V/1A |
| Operating temperature | 0℃~40℃ |
| Storage temperature | -20℃~70℃ |
| relative humidity | 15%~80% |
| Working environment | No vibration and corrosion medium around |
| Installation size | 40Mm * 80mm screw hole: 4-M4 (instrument) |
| Dimension | 208Mm * 70mm * 41mm (instrument) |
| Net weight | 0.36Kg (instrument) |
HBO HF-500 Force Gauge (Digital Display) Packing list
Force Gauge x1, Certificate of Conformity x1, Warranty Card x1, Manual x1, Instrument Case x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
