KEXIN QCJ-50 Film Impact Height 0~ 50cm Heavy weight 1000 +/- 1g

Picture show

	QCJ-50 Film Impact Device

Introduction

QCJ paint film impact tester is manufactured in accordance with the relevant provisions of the national standard GB/T1732-93 "Determination of paint film impact resistance" and combined with actual production conditions. The purpose of this impactor is to use heavy objects to drop from a high place to impact the paint film.

Principle

Set the hammer at the required height by the controller screw, and its height can be read from the positioning mark. Press the controller screw and the controller spring will be compressed. At this time, the round hole of the controller slider and the upper cover of the controller Align the hook with the round hole at the lower bottom of the controller, so that the connected weight falls down and hits the punch. The punch acts downward on the sample plate that was placed on the pillow block in advance, and then lifts the weight body and takes it out for testing. The passed sample board to observe the paint film test situation on the sample board.

Specifications

Instrument structure

Film Impact x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.