KEXIN QCJ-40 Film Test Impact Tester, Wood Impact Tester
The KEXIN QCJ-40 Paint Film Test Impact Tester is designed and manufactured for the impact resistance of the paint film on the surface of furniture. The Paint Film Test Impact Tester is used to evaluate the ability to increase the impact resistance of the paint film on the surface of thumb parts.
-
QCJ-50 film impactor
910.0 RMB -
JINGKELIAN QCJ-120B film Impact tester
1840.0 RMB -
KEXIN QCJ-120B Film Impact Device
1500.0 RMB -
JINHE XCJD-5 Digital Display Simply Supported Beam Impact Tester
7500.0 RMB -
KEXIN QCJ-50 Film Impact Height 0~ 50cm Heavy weight 1000 +/- 1g
820.0 RMB
Picture show
Introduction
The coating impact resistance test is suitable for testing the ability of the dry film coating of paint, varnish or related products to resist peeling or cracking from the substrate when it is deformed by the impact of different spheres under standard experimental conditions. The strength of the tested coating and its adhesion to the substrate. At present, although there are many types of impact testers commonly used at home and abroad, in the final analysis, they all use the principle that the drop height of the weight multiplied by the mass of the weight, and the impact force causes damage to the coating on the coating. For some coatings, counter-impact is also possible. This allows the instantaneous elongation of the coating to be checked. This model of paint film test impactor is designed and manufactured for the impact resistance of paint films on furniture surfaces. The paint film test impactor is used to evaluate the impact resistance of paint films on furniture surfaces.
Technical Parameters
model | QCJ-40 |
Implementation standards | GB/T4893.9-92 |
Test plate base | (200Ã250)mm |
Hammer weight | 500g±1g |
Impact steel ball diameter | 14mm |
scale index | 1mm |
scale scale | (0~40)cm |
KeXin QCJ-40 Film Impact DeviceSpecifications
LIST | VALUE |
---|---|
Impact height | 0~40cm |
Impact height | 40cm |
Scaling | 1mm |
Drop weight mass | 500g |
punch diameter | Φ14mm |
Workbench size | 200*250mm |
Meet the standard | GB/T 4893.9-92 |
KeXin QCJ-40 Film Impact Device Packing list
Film Impact x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
KeXin QCJ-40 Film Impact Device Comment
No relevant comments
FAQ
- Film mass inspection introduction
- Adhesion of film to solid surface
- Film - Determination of impact strength (impact tension and impact Hardness)
- Determination of cold resistance of films by impact tester
- Detailed explanation of coating impact resistance detection method
- Film Impact strength and flexibility testing
- Film impact resistance - Paint film impact meter
- Preparation and performance of room temperature curing silicone/polyurethane Coatings
- Synthesis of Hyperbranched Resin and Its Application in Polyurethane Coatings
- QCJ film impact tester (Painted film impact meter) instruction manual