CHENCHI SLD-J Tear Tester 50~ 16000mN
Built-in thermal printer, resolution 1mN, tearing arm (104 +/- 1) mm, tearing initial angle 27.5 ° +/- 0.5 °.
labchen
SLD-J
-
Yongxin ZSE-1000 Standard paper Tear tester 1000mN
$ 715.06 -
China NBC-563B touch screen paper microcomputer tearing degree tester
$ 1740.08 -
LABO LB-SL1000 Paper Tear Tester
$ 2320.58 -
HUITAO HT-F776 Tear Tester Elmendorf paper Plastic film
$ 4436.31 -
LD-SL-B tear strength tester, touch screen
$ 1556.77
Introduction
This instrument is used to measure the internal tearing resistance or tearing degree of the paper. The Principle of the instrument is based on the work consumed by tearing the test sample to a certain length. Normally, 16 sheets of paper are stacked on top of each other. together with the tear test. Therefore, the total work expended in tearing these sheets is divided by the number of sheets torn and the tear distance, and the quotient is the force, expressed in grams, required to tear a sheet. The calculation of the instrument results is based on the condition that 16 samples are torn, and the tearing distance is 86 mm (the tearing length of the sample is 43 mm, and the tearing distance is twice as long) . The instrument is easy to operate, reliable in performance, excellent in technology, digital display of test data, and test report printed by a printer. It is an indispensable professional equipment for scientific research units, paper manufacturers, packaging industry, and quality inspection departments.
labchen SLD-J Tear meterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | （10~1000）mN |
| Standard pendulum | (10~ 1000) mN, scale interval 10 mN |
| error of indication | 20% to 80% of the upper limit of measurement +/- 1% outside +/- 0.5% FS |
| Indication repeatability error | < 1% in the range of 20% to 80% of the upper limit of measurement, < 0.5% FS outside the range |
| Tear arm | 104±1㎜ |
| tearing initial angle | 27.5±0.5° |
| tear distance | 43±0.5㎜ |
| Distance between clamps | 2.8±0.3㎜ |
| environmental conditions | Temperature 20~ 40 ℃, relative humidity ≤ 85% |
| Dimension | 510×400×365 mm |
| weight | 23 |
labchen SLD-J Tear meter Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
