Pushen Ford-1 #cup with bracket, aluminum material
The Pushen Ford-1 #cup has an outflow aperture of 1.9mm and a measuring range of 10-35CST, which complies with the standard ASTM D 1200.
-
JINGKELIAN NK-2 NK Cup, used in electronic products, plastics, Coatings and other industries
370.0 RMB -
TRUIT TR 1004/2.5 French standard viscosity cup aperture φ2.5mm
350.0 RMB -
TRUIT TR 1004/8 French standard cup, aperture φ8.0mm
350.0 RMB -
China TR 1001/3 Zahn Cup No. 3 Portable viscosity cup 3.76mm
260.0 RMB -
Netherlands TQC VF2087 No. 4 Ford viscosity cup filter aperture 4.1mm
2130.0 RMB
Picture show
Introduction to Pusheen Ford Cup
Pushen/Pushen Ford Cup (also known as Ford Cup) is produced in accordance with the standard ASTM D 1200 of the American Society for Testing and Materials for paint and raw materials. The cup body of the Ford Cup is made of anodized aluminum, and the outflow hole is made of brass. According to the different diameters of outflow holes, Pushen has designed five models of Ford cups, No. 1, No. 2, No. 3, No. 4, and No. 5, all of which are used to test the viscosity of coatings, paints, etc., and the applicable measurement time is different.
The Ford cup can measure the viscosity of the sample by measuring the time required for a certain volume of the sample in the aluminum cup to flow out of the small hole at the bottom.
The Pushen/Pushen No. 1 Ford Cup is equipped with a stand for easy viscosity testing.
Design advantage
The design of the ring groove at the mouth of the cup can store the spilled liquid.
The external dimensions are designed so that they can be used in conjunction with the viscosity cup holder.
Easy to clean. There are no difficult-to-clean recesses in the structure of the cup wall and outflow hole.
Ford viscosity cups are produced with consistent quality control.
Each No. 1/2/3/4/5 Ford Cup is engraved with a unique serial number.
Standards
Ford (Ford) cups are made according to ASTM D 1200, the standard for paint and raw materials of the American Society for Testing and Materials
Show pictures
Pushen Ford-1# Ford cup with bracketSpecifications
LIST | VALUE |
---|---|
Viscosity range | 10~35cSt |
Flow hole diameter | 1.9mm |
capacity | 100ml |
cup height | 87mm |
Cup width | 55mm |
Cup body material | Aluminum cathode oxidation |
Filter material | Brass |
Applicable standard | ASTM D1200 |
Environment temperature | 23±0.2℃ |
Weight | 292g |
bracket | With bracket |
Pushen Ford-1# Ford cup with bracket Packing list
Viscosity cup x1, bracket x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
Pushen Ford-1# Ford cup with bracket Comment
FAQ
- Combined pencil hardness tester operating instructions
- Shanghai Pushen pushen film preparation instrument selection table [selection]
- Pushen KTQ Micrometer Film Applicator
- A good manual Ink Proofer from domestic (CN)