China NBC-1025 Peel strength tester 90 degree Peel strength tester
Maximum disbonding load 50kg, Test speed 10~ 60mm/min, experimental stroke 0~ 360mm adjustable, using pointer induction mode.
Domestic
NBC-1025
use
This machine is specially used to test the adhesion of copper foil circuits on PC boards or the fastness of tin foil, lead foil, tape, etc. to the surface of objects. During the test, the test piece is peeled off at a vertical angle. The actual 90 degree peel strength can be measured. Optional high-precision digital push-pull force meter.
Safety Precautions
1. The testing machine only uses single-phase 220V AC power supply.
2. Do not place flammable objects around the testing machine to avoid fire.
3ï¼The test case must be grounded, otherwise there is a risk of electric shock.
4. The incoming line end of the power supply should be connected to a leakage protection air with a certain amount; switches and contactors can cut off the power supply in case of emergency.
5. Never touch the electromagnet when the machine is working.
6ï¼If you need to move the machine, you must cut off the power supply before moving.
Domestic NBC-1025 Peel strength testerSpecifications
| LIST | VALUE |
|---|---|
| Maximum load | 50Kg |
| Test speed range | 10~60mm/min |
| induction method | pointer sensing |
| effective travel | 0~360mm |
| Weight | About 40kg |
| volume | 66x30x72cm |
| Power | AC220V/50HZ |
Domestic NBC-1025 Peel strength tester Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.