OSP-100 L610φ 10mm custom wire rod 510mm application width 10mm diameter

Picture show

	OSP-100 L610 Φ10 Coating rod

Parameters

The new OSP applicator is made with extrusion technology and can be customized in length.

Advantages of the OSP manual applicator

OSP has developed a new extruded wire rod manual applicator. The OSP wire bar manual applicator uses precision molds and cold extrusion technology to process concave and convex wavy curves on the surface of the steel bar, which has the same coating effect as the traditional wire bar manual applicator. However, because there is no thin steel wire wound on its surface, there is no worry about the steel wire loosening and breaking. Moreover, the curved lubrication of the surface is smooth, making it very easy to clean. The most commendable thing is that the OSP wire rod manual coater breaks through the limit of the traditional wire rod manual coater, and can coat the wet film with a thickness of only 2um, which solves the problem of ultra-thin film coating in one fell swoop.

★ There is no worry about the wire being loose and broken 

★ Very easy to clean 

★ Ultra-thin film coating is possible

It won't come loose, it won't break

The principle of plastic deformation of metal is used to roll various mountain shapes on the surface of the steel rod.

Comparison of cleaning results:

◎Coating solution: Water-based synthetic resin paint

◎ Cleaning method: Soak in alcohol for 24 hours, and then wipe with a cloth.

OSP manual applicator compared to traditional wire rods

The traditional wire rod coater is coated by winding a thin steel wire on the surface of the steel rod, and the thin steel wire on the surface is easy to loosen and break, and it is not easy to clean, and it cannot be coated with ultra-thin films.

Traditional manual applicators are insufficient

★ The steel wire is easy to loosen and break 

★ Not easy to clean 

★ Ultra-thin film coating is not possible

Is there a product that can replace the wire scraper?

After several improvements, OSP finally succeeded in developing the D-BAR. It was officially launched into the market in 2001.

Custom coating rod × 1, Encasement tube

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.