KEXIN QXP 0~ 25 single-channe fineness meter
Single-channe, range 0~ 25μm, scale unit μm, accuracy +/- 2µm, scraper material stainless steel, scraper size 175 * 65 * 13mm, groove size 140 * 13mm, doctor blade size 90 * 40 * 6mm, Applicable standard ISO1524-1983 (E), scale interval 2.5μm
-
TRUIT TR 1202/050 double-channel Coating Fineness meter 0~ 50μm
750.0 RMB -
JINGKELIAN QXP 50-150μm ISO single-channe Fineness gauge with third-party Measurement certificate
899.0 RMB -
QXD0-50 Fineness gauge YONGLIDA Fineness range 0-50μm scale interval 5μm
350.0 RMB -
MODERNER QXD-100 Large double-channel lithium battery paste Fineness gauge Fineness range 0~ 100μm
1450.0 RMB -
YONGLIDA Fineness gauge accessories, scraper
100.0 RMB
Picture show
Overview of QXP single groove fineness meter
Kexin QXP0-25/ QXP 0-50/ QXP 0-100 single-slot fineness meter is a single-slot fineness meter with measuring fineness ranges of 0~25μm, 0~50μm and 0~100μm respectively. The number of slots is 1, and it is a standard Fineness of Grind Gauge produced in accordance with the provisions of the international standard ISO1524. Although QXP0-25/ QXP 0-50/ QXP 0-100 single groove fineness gauge has a calibrated measurement range, it should be selected according to the range suggested by Kexin in practical application.
The material of this QXP0-25/ QXP 0-50/ QXP 0-100 single-slot fineness meter is stainless steel, which is used for particle fineness detection and is used in coatings, pigments, paints, paints and other industries.
Precautions for use
1. The front of the scraper can be used as a daily inspection of the straightness of the scraper;
2. Clean the scraper after use, apply anti-rust oil and put it in the box for storage;
3. The front of the scraper and the edge of the scraper must not be bumped;
4. The scraper fineness gauge should be calibrated in our factory after one year of use.
Standards
Kexin QXP0-25/0-50/0-100 single-slot fineness meter is manufactured in accordance with the relevant provisions of the international standard ISO1524-1983 (E), and is used for the determination of the particle fineness of paint and related products. count.
Specification
Scraper Dimensions: Length 175mm*Width 65mm*Thickness 13mm
Effective size of scraper groove: length 140mm*width 13mm
Scraper Dimensions: Length 90mm*Width 40mm*Thickness 6mm
ISO Fineness of Grind Gauge series model
Score standard error | Groove Ratio Error | Shape accuracy | Surface roughness | Remark | |||
Range (um) | Error (um) | ratio | Error (um) | ||||
single slot | 100 | <2.5 | 1 : 1400 | <2.5 | front | front | The relative error of the scale value at any point on the second groove of the double-groove scraper is not greater than 1.2mm |
50 | <2.5 | 1 : 2800 | <2.5 | flatness tolerance | 0.1 | ||
25 | <2 | 1 : 5600 | <2 | 0.012 | groove | ||
double slot | 100 | <2.5 | 1 : 1400 | <2.5 | Lateral Straightness Tolerance | 0.2Ra=1.6 | |
50 | <2.5 | 1 : 2800 | <2.5 | 0.001 | |||
25 | <2 | 1 : 5600 | <2 | 0.012 | groove |
KeXin QXP0-25 Single-channe finerSpecifications
LIST | VALUE |
---|---|
Scraper type | Single-channe |
Number of grooves | 1 |
range | 0~25μm |
Scale unit | μm |
Accuracy | ±2µm |
scraper material | stainless steel |
Scraper size | 175*65*13mm |
Groove size | 140*13mm |
Doctor blade size | 90*40*6mm |
Applicable standards | ISO1524-1983(E) |
Scale interval | 2.5μm |
Recommended range | 5~15μm |
KeXin QXP0-25 Single-channe finer Packing list
Scraper x1, doctor blade x2
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
KeXin QXP0-25 Single-channe finer Comment
FAQ
- Fineness gauge conversion of units
- How to Read the Scraper Fineness Meter
- Doctor blade Spreader process FAQ solution
- Fineness meter selection method
- How to measure the Fineness of Coatings with a Scraper Fineness Meter?
- Fineness Detection of Precious Metal Slurry in Microelectronic Technology with Fineness Meter
- Coating routine performance inspection items
- Scraper Fineness Meter How to measure the Fineness of slurry
- Fineness gauge main role
- Scraper fineness meter selection guide
- ActiveGB/T 17001.6-2022
- ActiveHG/T 5776-2020
- ActiveHG/T 5370-2018
- ActiveQB/T 2025-2013
- ActiveJT/T 821.2-2011
- ActiveJT/T 821.1-2011
- ActiveASTM D1210-05-2022
- ActiveJB/T 9385-2017
- ActiveGB/T 1724-2019
- ActiveASTM D1316-2020
- ActiveJJG 905-2010
- ActiveASTM D333-2021
- ActiveISO 1524-2020
- AbolishGB/T 13217.3-2008
- ReplacedQB/T 2025-1994
- ReplacedASTM D1210-1996
- ReplacedISO 1524-2000
- ActiveGB/T 13492-1992
- ActiveGB/T 17459-1998
- AbolishJJG 905-1996