TQC No. 5 Ford Ford viscosity cup, model VF2033, filter aperture 5.2mm
Viscosity cup ASTM D1200 "FORD" with fixed nozzle 5mm
-
TRUIT TR 1004/2.5 French standard viscosity cup aperture φ2.5mm
350.0 RMB -
Pushen DIN6 Viscosity cup with bracket, customized
740.0 RMB -
China T-4 coated with 4 viscosity cups coated with 4 cups, in line with GB/T1723 standard
380.0 RMB -
PUSHEN Zahn 1 #PS 1024/1 Zahn Cup
330.0 RMB -
Ander NK-2 NK Cup, outflow time 10~ 60s
430.0 RMB
Picture show
Introduction to Aluminum Alloy Ford Cup
The TQC Ford cup is used for rapid viscosity testing of fluids that comply with Newtonian mechanics or are close to Newtonian mechanical properties. It is the most widely used measurement tool in the field of testing coating viscosity. The outflow cup method is also recognized by the world as a fast and effective way to measure viscosity. method.
Today's paint Ford Cups are produced according to a number of international standards that have been around for many years and specify not only the precise dimensional tolerances required in the process, but also their use and the recording of data obtained.
Each TQC brand paint Ford cup is produced under continuous quality control procedures and is engraved with a unique serial number. Most Ford cups are made of aluminum titanium alloy and stainless steel. All filters embedded in the bottom of the Ford cup are made of stainless steel.
FORD viscosity cups are used to test the concentration of coatings, paints and other similar products. Through the process of liquid flowing out of the hole under the Ford cup, the viscosity of the liquid is calculated and classified. This method of measuring kinematic viscosity generally uses minutes to calculate the flow time, and then uses a disk viscosity calculator to convert Unit of dynamic viscosity.
Technical Parameters
FORD number | model | filter pore size | Viscosity range | flow time |
number 1 | VF2029 | 1.9 | 10-35 | 55-100 |
number 2 | VF2030 | 2.53 | 25-120 | 40-100 |
number 3 | VF2031 | 3.4 | 49-220 | 30-100 |
No 4 | VF2032 | 4.1 | 70-370 | 30-100 |
Number 5 | VF2033 | 5.2 | 200-1200 | 30-100 |
Unit: mm, cst, s | ||||
Other parameters | ||||
Material | titanium anodized aluminum | |||
standard | ASTM D1200'FORD' | |||
weight | 196g | |||
width | (MAX):92mm | |||
cup height | 74mm |
Ford Cup Features
1. The paint Ford viscosity cup is designed with a deep groove at the mouth to prevent the measured liquid from overflowing.
2. Various special paint Ford cup holders
3. The production of TQC paint Ford cup goes through strict quality monitoring procedures.
4. Each cup is engraved with a unique numerical code
5. Each paint Ford cup is packed in a thick plastic box with soft material stuffed inside to protect the cup.
Options:
1. VF2067 TM1 temperature regulator for DIN and ASTM standard cups
2. VF1980 S20 special bracket designed in 2005
3. VF2062 S10 round bracket
4ï¼VF2061 S40B tripod, stainless steel ring, level
5. VF1982 can choose a temperature regulator that meets DIN standards and an S20 special bracket that meets ASTM standards.
6. VF2053 viscosity conversion disc
7ï¼D10076 C510 banknote meter LCD digital display, 9 hours, 59 minutes, 59.99 minutes
8. VF2034 certificate, M type, cup type FB10, conforms to ASTM D 1200 standard
Product details
Ford Cup Holder Type
TQC model selection table
Take you into the Dutch TQC
TQC VF2033 Ford viscosity cupSpecifications
LIST | VALUE |
---|---|
Viscosity range | 200~1200cSt |
outflow time | 30~100s |
flow hole diameter | 5.2mm |
cup height | 74mm |
Maximum width | 92mm |
Cup body material | Titanium anodic oxidation aluminum |
Filter material | Titanium anodic oxidation aluminum |
Applicable standards | ASTM D1200‘FORD |
certificate | without |
Weight | 196g |
TQC VF2033 Ford viscosity cup Packing list
Viscosity cup x1, Encasement box x1, Manual x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
TQC VF2033 Ford viscosity cup Comment
FAQ
- Tide Review: Cylindrical Bending Tester SP1820
- Operation method steps of small coating machine in TQC laboratory in the Netherlands
- Netherlands TQC SP0500 swing rod hardness tester specific operation method
- How to install and set up the Netherlands TQC SP0500 Swing Bar Hardness Tester?
- TQC Pencil Hardness Tester Instruction Manual
- TQC RV2100 Digital Display Thermohygrometer Instruction Manual
- How to use TQC SP1830 cone shaft bending tester
- Netherlands TQC SP1570 Copy Tape Tester Operation Manual
- TQC Paint Film Impact Tester Operation Instructions
- The specific operation method of TQC SP1820 cylindrical bending tester