Netherlands TQC VF2168 4-sided coating applicator wet-film wiper 15/30/60/90µm
TQC 4-sided film applicator 60mm, clearance 15/30/60/90µm
-
Leneta Form M72 Checkerboard Opacity Chart 51x279mm
2090.0 RMB -
Leneta 2A sealed Opacity Chart
1250.0 RMB -
Leneta Form 2DX Opacity Chart Leneta popular model sealed cardboard
1060.0 RMB -
Leneta 9A sealed Opacity Chart with black and white stripes
1180.0 RMB -
Leneta Form M72-BG Black Gray Opacity Chart 51x279mm
2610.0 RMB
Picture show
Introduction
The TQC brand four-sided film applicator is made of stainless steel, produced in accordance with international standards, the production process is strictly controlled, and is engraved with a unique serial number.
âMultifunctional four-sided film applicator can prepare 4 different thicknesses of wet films
âThere is a paint guide attached to one side of the paint applicator, which can also be removed.
âThe material is stainless steel, ensuring that the applicator is not corroded by acidic or alkaline substances in paint or cleaning agents.
Just change the angle to get 4 different coating film thicknesses, which is easy to operate.
Technical Parameters
model | Coating film thickness | Coating width | Accuracy | size | Material | Standards compliant |
VF2168 | 15/30/60/90 µm | 60mm | ±3μm | 75x20x25mm/1115x20x20mm | Stainless steel | ASTM D823 |
VF2169 | 30/60/90/120 µm | 60mm | ||||
VF2170 | 50/100/150/200 µm | 60mm | ||||
VF2173 | 15/30/60/90 µm | 80mm | ||||
VF2174 | 30/60/90/120 µm | 80mm | ||||
VF2175 | 50/100/150/200 µm | 80mm |
Product details
Introduction to paint leveling
Usually, people use direct observation with the naked eye to compare the sample and the standard sample in parallel to judge the leveling properties of the coating. This method varies from person to person and is highly subjective. The essence of leveling refers to the flat and smooth state of the coating after application. There should be no irregularities such as orange peel, brush marks, ripples, and shrinkage holes on the surface with good leveling.
Take you into the Dutch TQC
TQC VF2168 4-Sided coating applicatorSpecifications
LIST | VALUE |
---|---|
type | multi-faceted |
Wet film thickness | 15/30/60/90µm |
Application width | 60mm |
Accuracy | ±3μm |
material | High grade stainless steel |
standard | ASTM D823 |
size | 75*20*25mm/1115*20*20mm |
TQC VF2168 4-Sided coating applicator Packing list
Coating applicator x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
TQC VF2168 4-Sided coating applicator Comment
FAQ
- Tide Review: Cylindrical Bending Tester SP1820
- Operation method steps of small coating machine in TQC laboratory in the Netherlands
- Netherlands TQC SP0500 swing rod hardness tester specific operation method
- How to install and set up the Netherlands TQC SP0500 Swing Bar Hardness Tester?
- TQC Pencil Hardness Tester Instruction Manual
- TQC RV2100 Digital Display Thermohygrometer Instruction Manual
- How to use TQC SP1830 cone shaft bending tester
- Netherlands TQC SP1570 Copy Tape Tester Operation Manual
- TQC Paint Film Impact Tester Operation Instructions
- The specific operation method of TQC SP1820 cylindrical bending tester
- ActiveGB/T 1727-2021
- ActiveGB/T 7044-2022
- ActiveHG/T 3951-2007
- ActiveGB/T 13217.1-2020
- ActiveGB/T 9755-2014
- ActiveASTM D823-2018
- ActiveJB/T 7663.2-2007
- ReplacedGB 1727-1992