MODERNER QBB 37ml Stainless Steel Coating Specific Gravity Cup Density Cup
QBB Coating Specific Gravity Cup is suitable for measuring the specific gravity of various Coatings and auxiliary materials, oils and other liquids. The cup body volume is 37ml, the material is stainless steel, Applicable standard GB/T 6750-2007, and the measurement temperature is 23 +/- 0.5 ℃.
Picture show
Specifications
model | Specifications (ml) | Measuring temperature (°C) | material |
QBB 37ml | 37 | 23±0.5℃ | Stainless steel |
QBB 50ml | 50 | ||
QBB100ml | 100 |
Application of QBB coating specific gravity cup
QBB paint specific gravity cup is suitable for measuring the specific gravity of various paints and auxiliary materials, oils and other liquids. The specific gravity cup meets the requirements of the national standard GB/T 6750-2007 for this instrument.
QBB paint specific gravity cup specification chart
Real shot of QBB paint specific gravity cup
Coating Density Determination Experiment
Equipment and Utensils
1. Precision balance: the specific gravity cup with a capacity of 50ml to 100ml is accurate to 10mg, and the specific gravity cup with a capacity of less than 50ml is accurate to 1mg. (bring your own)
2. Mercury thermometer: 0~50°C with a scale of 0.2°C. (bring your own)
3. Specific gravity cup
Experimental measurement steps
1) Before the test, wipe clean the inside and outside of the specific gravity cup, put the specific gravity cup on the balance tray after drying, and weigh the specific gravity cup m1.
2) Take off the upper cover of the specific gravity cup, put the sample to be tested close to the mouth of the cup (note that there should be no foam), cover it, and when the excess part of the sample overflows from the small hole in the center of the cover, clean it with a clean Wipe clean with a rag.
3) Gently place the specific gravity cup filled with the sample on the balance tray to weigh, and record the mass m2 of the specific gravity cup filled with the tested product.
4) The specific gravity is calculated according to the following formula:
In the formula:
m1——the mass of empty specific gravity cup, unit is (g);
m2——at the test temperature, the mass of the specific gravity cup filled with the sample, the unit is (g);
vt - specific gravity cup volume at test temperature.
When measuring with a specific gravity cup, it is best to sample twice and take the arithmetic mean.
Moderner QBB 37ml Specific Gravity CupSpecifications
LIST | VALUE |
---|---|
Cup volume | 37ml |
material | stainless steel |
Applicable standards | GB/T 6750-2007 |
Measuring temperature | 23±0.5℃ |
Moderner QBB 37ml Specific Gravity Cup Packing list
Specific Gravity Cup x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
Moderner QBB 37ml Specific Gravity Cup Comment
FAQ
- Specific Gravity bottle Density Error
- Influencing Factors and Error Analysis of Experimental Results of Density Cup Measurement of Solid Density
- Comparison of QBB Density Cup of TQC, modern environment and Jingke three brands
- Coating Density (specific gravity) Test Method
- Determination of Pigment Volume
- Several main items of powder coating performance testing
- Coating powder performance testing - Surface Fineness Determination
- How to measure Coating varnishes Density with Specific Gravity Bottles
- Determination of Density and Crystallinity of Polymer by Analytical Density Cup Method
- Pigment specific gravity measurement method
- ActiveGB/T 42541-2023
- ActiveISO 1675-2022
- ActiveHG/T 3951-2007
- ActiveGB/T 1033.1-2008
- ActiveGB/T 13354-1992
- ReplacedISO 2811-1-2016
- ActiveGB/T 21862.5-2008
- AbolishGB/T 6750-1986
- ActiveASTM D1475-2020
- ActiveISO 2811-1-2016
- AbolishGB/T 9152-1988
- ActiveGB/T 7788-2007
- ActiveGB/T 6823-2008
- AbolishGB/T 1713-1989
- ActiveGB/T 6750-2007