JINGKELIAN QXP 0-50 single-channe Fineness gauge 0~ 25μm/5μm
JINGKELIAN QXP 0-50 single-channe Fineness gauge measuring range is between 0-50um, the minimum reading is 5um, each set of Fineness gauge contains a scraper, two scraper, QXP Fineness gauge is Titanium Dioxide, calcium carbonate scraper Fineness.
-
MODERNER QXD-50 Large wide-channel Fineness gauge
1000.0 RMB -
JINGKELIAN QXP 0-100μm ISO single-channe Fineness gauge with 3rd party Measurement certificate
899.0 RMB -
JINGKELIAN QXP 50-150μm ISO single-channe Fineness gauge with third-party Measurement certificate
899.0 RMB -
China QXD-50 Zirconia Ceramic Fineness gauge double-channel Fineness gauge 0~ 50μm
2500.0 RMB -
MODERNER Fineness gauge scraper, single-channel Fineness gauge 70mm
360.0 RMB
Picture show
The QXP 0-50 single-slot Fineness of Grind Gauge is produced and designed by Jingke, a domestic brand, in accordance with the relevant provisions of the international standard ISO1524-1983. It is suitable for fineness testing in most paints, paints, pigments and other industries. Measuring instruments required in the room. The QXP 0-50 single-slot Fineness of Grind Gauge is made of stainless steel, equipped with 2 scrapers, and the surface roughness of the scrapers is Ra0.4. The measuring range of this single groove scraper bar fineness meter is 0~50 microns.
Product parameters
model | QXP0-50 |
Measuring range | 0-50um |
minimum reading | 5um |
Scraper Dimensions | 170x65x13mm |
Groove effective size | 140mm×13mm |
Squeegee accuracy: blade straight line tolerance 2um, surface roughness Ra0.4
Precautions
1. The front of the scraper can be used as a daily inspection of the straightness of the scraper;
2. Clean the scraper after use, apply anti-rust oil and put it in the box for storage;
3. The front of the scraper and the edge of the scraper must not be bumped;
4. The QXP0-50 single-slot Fineness of Grind Gauge should be calibrated in our factory after one year of use.
Packing Specifications
Each set of QXP0-50 single-slot Fineness of Grind Gauge includes one scraper and two scrapers.
Standards
QXP 0-50 single-slot Fineness of Grind Gauge is manufactured in accordance with the relevant provisions of the international standard ISO1524-1983 (E), and is used for the determination of particle fineness of paint and related products.
Same series model selection
model | type | Maximum range (μm) | Minimum scale value (μm) | Recommended range (μm) |
QXP 0-25 | single slot | 25 | 2.5 | 5-15 |
QXP 0-50 | single slot | 50 | 5 | 15-40 |
QXP 50-150 | single slot | 150 | 10 | |
QXP 0-100S | double slot | 100 | 10 | 40-90 |
JingKeLian QXP 0-50 ISO single-channe Fineness gaugeSpecifications
LIST | VALUE |
---|---|
Scraper type | Single-channe |
Number of grooves | 1 |
range | 0 ~ 50µm |
Scale unit | mm |
precision | ± 5 μm |
Scraper material | stainless steel |
Applicable standard | ISO1524 - 1983 |
Recommended range | 15-40µm |
JingKeLian QXP 0-50 ISO single-channe Fineness gauge Packing list
Scraper x1, scraper x2
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
JingKeLian QXP 0-50 ISO single-channe Fineness gauge Comment
FAQ
- Exterior wall emulsion paint production process
- This is a scraper Fineness meter, not a brick!
- Influence of Scraper Accuracy and Scraper on Coating Fineness Measurement Results
- Scraper fineness meter selection guide
- Video shows you how to use the Scraper Fineness Meter
- Influence of Scraper Fineness Meter on Printing ink Fineness Detection
- Printing ink common sense collation and sharing
- Determination of Coating Fineness
- Coating routine performance inspection items
- Fineness of Ground Gauge indication method of verification
- ActiveGB/T 17001.6-2022
- ActiveHG/T 5370-2018
- ActiveHG/T 5367.1-2018
- ActiveHG/T 3349-2003
- ActiveJT/T 821.3-2011
- ActiveJT/T 821.1-2011
- ActiveASTM D1210-05-2022
- ActiveJB/T 9385-2017
- ActiveGB/T 1724-2019
- ActiveASTM D1316-2020
- ActiveJJG 905-2010
- ActiveASTM D333-2021
- ActiveISO 1524-2020
- AbolishGB/T 13217.3-2008
- ReplacedQB/T 2025-1994
- ActiveGB/T 21867.2-2008
- ActiveQB/T 1046-2012
- ReplacedASTM D1210-1996
- ReplacedISO 1524-2000
- ActiveHG/T 2243-1991