JINGKELIAN QGS film Drying time tester for measuring film, putty film surface Drying time and actual Drying time
JINGKELIAN QGS film Drying time tester conforms to GB/T1728 standard, specially used to test film and putty film surface Drying time, QGS film Drying time tester is suitable for test sample size of 50 × 120 × (0.2~ 0.3) mm.
-
QGS film Drying time Recorder YONGLIDA tester weight 200g
150.0 RMB -
JINGKELIAN QWH film imprint tester
500.0 RMB -
JINGKELIAN QGS film Drying time tester for measuring film, putty film surface Drying time and actual Drying time
300.0 RMB -
CHINA QGS film Drying time tester
280.0 RMB -
TRUIT TR 3605 paint film drying time tester, in line with GB/T 1728 standard
180.0 RMB
Picture show
product description
QGS paint film drying time tester is used to measure the surface drying time and actual drying time of paint film and putty film. The instrument implements the new standard of GB/T1728-79, selects high-precision intelligent instruments, and uses computer information acquisition processors to complete the entire production experiment process. It has the advantages of simple operation, accurate experimental data, and enjoys independent intellectual property rights.
Steps
—Place a certain filter paper on the surface of the paint film to be tested, and gently place the instrument on the surface of the filter paper. —After 30 seconds, remove the drying tester and turn the sample over. —Tap a few times with your fingers. If the filter paper can fall freely and the filter paper fibers are not stuck on the surface of the paint film, the paint film is considered to be completely dry. 1. Equipment and instruments: (1) The total weight of the weight is 200±0.2g, and the bottom area is 1 square centimeter (2) Stopwatch, absorbent cotton, filter paper, tweezers (self-provided)2. The test needs to be carried out at a temperature of 23±2°C and a relative humidity of 50±5%.
Detail image
JingKeLian QGS Drying time testerSpecifications
LIST | VALUE |
---|---|
Execution standards | GB/T 1728-89 |
Weight weight | 200±0.2g |
Weight base area | 1cm² |
Specimen size | 50×120×(0.2-0.3) |
length | 316X24X3mm |
JingKeLian QGS Drying time tester Packing list
Drying time tester x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
JingKeLian QGS Drying time tester Comment
FAQ
- Basic Principle and Application Analysis of Paints drying time Tester
- How does the imprinting method test the actual drying speed?
- How is film Drying time determined?
- Standard mass detection method in painting process
- What happens if you don't pay attention to the drying and curing of the paint film?
- Calculation method of putty powder dosage
- Determination of drying time and actual drying time of coating surfaces
- Comparison of five different coating drying methods
- Coating drying performance testing
- SG-1 hard drying tester instruction manual
- ActiveHG/T 5776-2020
- ActiveHG/T 5370-2018
- ActiveHG/T 5367.1-2018
- ActiveHG/T 5065-2016
- ActiveGB/T 1728-2020
- AbolishGB 14907-2002
- ISO 1517-1995
- AbolishGB/T 1728-1979