JINGKELIAN QGZ-6 12 24 film Drying time Recorder Scribing radius: 0.25/0.5/1.0/1.5mm
JINGKELIAN film Drying time Recorder QGZ-6 12 24 is specially used for Coating film Drying time measurement, the applicable test size is 200 × 200mm, QGZ circumferential film Drying time Recorder conforms to GB1727 standard.
-
PUSHEN GZY-I Straight-line drying-time Recorder
4200.0 RMB -
PUSHEN Pushen GZY-II Straight-line drying-time Recorder
4999.0 RMB -
MODERNER GZY-2 Drying time recorder 3/6/12/24/48 hours optional
4340.0 RMB -
MODERNER Drying time recorder film accessory 75/150μm film applicator + push rod
980.0 RMB -
PUSHEN QT-I film Drying time Recorder ISO 9117-4, ASTM D 5895 GB/T 37362.1
3100.0 RMB
Picture show
Application of paint film drying time tester
QGZ-(6, 12, 24) paint film drying time tester is a new type of instrument for measuring paint drying time. For the coating film formed by various paints, it can automatically and continuously display the state of each stage of the drying process in the form of drawing a circular trajectory, and can intuitively analyze and observe the time spent in each stage. It is a satisfactory instrument for paint testing and paint formulation research.
Structure of QGZ-6 12 24 paint film drying time tester
It consists of a switch (1), an outer cover (2), a motor (inside the cover), a foot (3), a connecting shaft (4), a rotating arm (5), a marking needle (6), a test plate (7), and a time dial (8) Composition.
Requirements for the use of automatic paint film drying time tester
1. Test plate: glass plate (200*200*2~3). Or smooth tin plate (200*200*0.2~0.3) or agreed test plate material.
2. Test environment: According to the requirements of GB1727-79, the coated test panel is placed horizontally, away from airflow and direct sunlight, and the drying test is carried out at a temperature of 25±1°C and a relative humidity of 65±5%. Carry out the drying test according to other agreed conditions.
Principle of Paint Film Drying Time Meter
Place the paint film drying time tester on the prepared coating film test plate, turn on the power supply, synchronize the motor, and drive the rotating arm (5) equipped with the scribing needle (6) through the connecting shaft (4). (The rotating arm is in a free-falling state) Rotate at a constant speed at a speed of one cycle/6 hours, one cycle/12 hours, one cycle/24 hours, and the scribing needle will draw a circular track with a diameter of 100mm on the coating film. As the coating film dries gradually over time, the plow mark on the coating film that the needle scratches changes from wide to narrow, from deep to shallow, until finally no trace can be drawn, thus showing the whole process of drying.
JingKeLian QGZ-6 12 24 Film Drying time RecorderSpecifications
LIST | VALUE |
---|---|
Number of strokes | 4 stitches |
Scratch Specifications | R 0.25/0.5/1.0/1.5mm |
itinerary | F100mm |
trajectory period | 6/12/24h/T |
Execution standards | GB/T1728-79 |
Measurement error | ±0.5% |
JingKeLian QGZ-6 12 24 Film Drying time Recorder Packing list
Film Drying time Recorder x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
JingKeLian QGZ-6 12 24 Film Drying time Recorder Comment
FAQ
- Basic Principle and Application Analysis of Paints drying time Tester
- How does the imprinting method test the actual drying speed?
- Coating construction performance testing Application instrument type summary
- Test methods for different drying states of paint films
- Coating drying time and good painting interval [table]
- How to measure film and film Drying time?
- Common defects of color change painting - orange pattern and sand marks
- Film preparation and drying methods: tack-free and hard drying
- What properties do ceramic decorative water-based coatings need to test? What requirements are met?
- What happens if you don't pay attention to the drying and curing of the paint film?