JINGKELIAN QNF film Backtack tester 3 pcs
JINGKELIAN film Backtack tester QNF conforms to GB1762 standard, used to test mucous membranes after tacking, standard 500g weight, QNF film Backtack tester applicable sample size is 50 × 120mm.
Picture show
product description
Jingke QNF paint film tack back tester measures the tack back of the mucous membrane. The preheated weight filter paper is placed on the paint film, and after drying under the specified time and temperature and humidity conditions, the weight and filter paper are removed. , Observe the area evaluation of the bonded filter paper fiber with a 4 times magnifying glass. Executive standard: GB1762-89.
Operation steps of paint film back tack tester
Put a certain filter paper on the surface of the paint film to be tested, and place the QNF paint film back tack tester gently on the surface of the filter paper. → After 30 seconds, remove the dry tester and turn the sample over. → Gently tap a few times with your fingers, if the filter paper can fall freely and the filter paper fibers are not stuck on the surface of the film, it is considered that the paint film is completely dry.
Detail drawing of paint film back tack tester
JingKeLian QNF Film Backtack testerSpecifications
LIST | VALUE |
---|---|
Execution standards | GB1762-89 |
Weight | 500g |
bottom area | 1c㎡ |
Specimen size | 50×120mm |
Filter paper | 20×20mm |
JingKeLian QNF Film Backtack tester Packing list
Instrument X3, Encasement box X1, Manual X1, Certificate X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
JingKeLian QNF Film Backtack tester Comment
FAQ
- Determination method and application analysis of paint film after tack
- Coating Printing ink Viscosity performance testing instrument type summation
- Instructions for use of HNQ film viscosity tester
- Determination of film drying performance
- Viscosity of paint film and its determination
- Coating performance test for painting mass evaluation
- Container coatings Viscosity performance testing