MODERNER BZT non-stick tire time tester for the determination of non-stick tire drying time in GM298 "road marking paints"
Determination of drying time of non-stick tires for "normal temperature marking Coating" and "heating type marking Coating" in GM298 "road marking paints". Tire size Ø 241 +/- 6 mm
-
PUSHEN Pushen GZY-II Straight-line drying-time Recorder
4999.0 RMB -
QGZ-A Straight-line drying-time Recorder YONGLIDA 6/12/24 hours three speeds
2900.0 RMB -
CHINA QGZ-24 Circular type automatic film Drying time Recorder
820.0 RMB -
JINGKELIAN QGZ-A Drying time Recorder GB/T1728-89 standard, scribing stroke 305mm
2630.0 RMB -
JINGKELIAN BZT Non-stick tire time tester for the determination of sticky tire Drying time in GA/T298-2001
760.0 RMB
Picture show
Application of BZT non-stick tire time tester
BZT non-stick tire time tester is mainly used to determine the drying time of "normal temperature marking paint" and "heated marking paint" in GM298 "Road marking paint".
Basic parameters of BZT non-stick tire time tester
Tire size: ① 241 ± 6 mm
Instrument weight: 1 5.8 ± 0.2kg
Physical picture of BZT non-stick tire time tester
Operation steps of BZT non-stick tire time tester
(1) The sample is coated on a glass sheet (200mmX1 50mmX5mm), and it is coated into an 80mm wide strip parallel to the short side of the glass sheet at the center of the long side. The thickness of the wet paint film is 200 u m ± 20 u m.
(2) After applying, immediately press the stopwatch. After 10 minutes, the two handheld measuring instrument handles will roll the measuring instrument from the center of one end of the short side of the test plate to the other end at a constant speed for 1 s. Immediately observe with the naked eye whether the tire of the measuring instrument has adhesive paint. If there is adhesive paint, immediately wipe the tire with a cotton cloth wetted with acetone or methyl ethyl ketone.
(3) After that, the test is repeated every 30s until the tire is not sticky, and the stopwatch is stopped to record, which is the "non-sticky tire time" of the sample.
Precautions
1. When rolling the instrument, the handle should be gently held with both hands to avoid any force other than the instrument's own weight being applied to the paint surface.
2. The BZT non-stick tire time tester should be placed in a cool, dry place to avoid sunlight exposure, which can cause tire aging and deformation.
Moderner BZT Non-stick tire time testerSpecifications
LIST | VALUE |
---|---|
Tire size | Φ241±6 mm |
Instrument weight | 15.8±0.2kg |
Moderner BZT Non-stick tire time tester Packing list
Tester x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
Moderner BZT Non-stick tire time tester Comment
FAQ
- Basic Principle and Application Analysis of Paints drying time Tester
- Requirements for lacquer in the drying process
- Coating construction performance testing Application instrument type summary
- SG-1 hard drying tester instruction manual
- Modern environment full range of product selection table [selection]
- Determination of drying time of coating film
- Summary and arrangement of relevant standards for painting and corrosion prevention
- Instructions for use of BZT non-stick tire time tester
- Coating powder storage stability testing
- Film preparation and drying methods: tack-free and hard drying