MODERNER WZJ-II Bending machine, testing equipment for measuring the bending resistance performance of colored steel plates and Aluminum Panels
Designed and manufactured according to the requirements of color steel plate and Aluminum Panel manufacturers to test the flexibility T-Bend performance of color steel plate and Aluminum Panel. The equipment complies with the requirements of NCCA "Standard" "T" Bend Test Method ".
-
TRUIT TR 5212 cylindrical mandrel bending instrument
2750.0 RMB -
PUSHEN ZQ-V Conical Mandrel Bending Tester
3700.0 RMB -
CHINA QTZ film Conical Mandrel Tester
960.0 RMB -
MODERNER WQ-ⅱ Cylinder Bending tester 9 cylinders of different diameters
3500.0 RMB -
YONGLIDA WZJ-II Bending Machine Color plate flexibility test
3100.0 RMB
Picture show
product description
WZJ-Ⅱ type bending machine is carefully designed and manufactured according to the requirements of the current color steel plate and aluminum plate manufacturers for testing the flexibility-T bending performance of color steel plate and aluminum plate, combined with the actual production. The equipment complies with the requirements of NCCA "Standard" "T" Bending Test Method. WZJ-Ⅱ type bending machine is compact in structure, simple in appearance and easy to use. It is a satisfactory equipment for testing the bending resistance of colored steel plates and aluminum plates.
Specifications
model | WZJ-II |
Pressable steel plate, aluminum plate | 0-1mm |
Total Weight | 50kg |
Dimensions | 300mmx300mmx190mm (length x width x height) |
Show pictures
Instructions
1) The color steel plate or aluminum plate is made into a test plate with a width not exceeding 100mm and a moderate length.
2) Turn the handle on the right side of the bending machine to an angle, so that the middle triangular pressure block and the lower pad are spaced apart, and put the finished test plate in (note: the test plate should be placed in parallel and the distance should be moderate) Then turn back the right handle to make the triangular briquetting block press the test plate tightly.
3) Turn the handle on the left so that the block on it presses the test plate onto the slope of the triangular block.
4) Turn the handle on the left to make it return to its original position, and then take out the test plate. Turn the handle on the right to make a sufficient distance between the triangular pressure block and the block, put the bent test plate in, and turn the handle on the right several times to flatten the bent part.
5) Take out the test panel, and observe whether the color paint in the crease of the test panel is peeled off or peeled off, so as to determine the bending resistance of the test panel.
6) If multiple bending is required, repeat the above steps.
Precautions
In order to facilitate transportation, the two handles are not installed on the main unit at the factory. After the user unpacks the box, screw the two handles on the main unit with an adjustable wrench, and pay attention to screwing them to the bottom.
Moderner WZJ-II Bending machineSpecifications
LIST | VALUE |
---|---|
Compressible Steel Plate, Aluminum Panel | 0-1mm |
Completely-built unit weight | 50kg |
Overall dimensions | 300*300*190mm |
Moderner WZJ-II Bending machine Packing list
Host x1, handle x2
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
Moderner WZJ-II Bending machine Comment
FAQ
- Detection of coating flexibility
- Effect of acrylic resin on the performance of PVDF topcoat
- Coated steel coatings adhesion performance
- Detailed explanation of 3 methods for measuring film flexibility
- Introduction of film bending test operation
- Film Bending tester operation video
- Selection scheme of cold-rolled steel strip material testing instrument
- Modern environment full range of product selection table [selection]
- Determination of film elasticity by tortuous test