SHENYANGTIANXING W-20 stainless steel Wechsler hardness tester for testing aluminum alloy building profiles, pipes and sheets
SHENYANGTIANXING W-20 stainless steel Wechsler hardness tester Minimum sample inner diameter: φ 10mm, maximum sample thickness: 6mm.
-
LANDTEK FM-204G Feed grain durometer
1800.0 RMB -
LANDTEK HM-934-1 digital display pasteurized durometer special indentation hardness tester for aluminum industry
3090.0 RMB -
Pap Sclerometer BA-1 Hypertherm
3260.0 RMB -
Digital Display Pap Sclerometer AMITTARI HBa-1 Used in Aluminum Processing Industry
3180.0 RMB -
SHENYANGTIANXING W-B75 durometer for brass tube and brass belt
5600.0 RMB
Picture show
Introduction to W-20 Series Stainless Steel Webster Hardness Tester
Shenyang Tianxing W-20 series stainless steel Webster hardness testers (also known as Webster hardness pliers and Weber hardness testers) are divided into three models: W-20, W-20a, and W-20b. Different models have different uses.
W-20 stainless steel Webster hardness tester is mainly used to test aluminum alloy building profiles, pipes and plates;
Model W-20a can be used to detect industrial aluminum profiles, plates and parts with a thickness up to 13mm;
Model W-20b is used to test small aluminum profiles and aluminum pipes with an inner diameter greater than 6mm.
Shenyang Tianxing W-20 series stainless steel Webster hardness tester can be used to quickly test the hardness of aluminum alloys at the production site. It is the preferred instrument for testing the mechanical properties of aluminum alloy profiles.
Application
Shenyang Tianxing W-20 series Webster hardness tester is used to quickly detect the hardness of aluminum alloy profiles, pipes, plates, aluminum parts and other soft metals, determine whether the aluminum profiles have aging, whether the aging is qualified, and distinguish different brands of aluminum and Different aging status. The Webster hardness tester is particularly suitable for rapid, non-destructive piece-by-piece inspection of batches of aluminum profiles, doors, windows and curtain walls at production sites, sales sites or construction sites.
plan
Features
1. Indenter: The indenter is made of imported special steel materials and new technology. It has high hardness, good toughness, long life and good interchangeability. The outer packaging imported from Germany provides comprehensive protection for the pressure needle.
2. Pointer assembly: High-strength pointer, which is not easy to bend or deform after long-term use or incorrect operation.
3. Surface window: High-strength, high-toughness surface window glass is not easy to break after being impacted.
4. Handle: Forged aluminum alloy material, anodized upper handle, beautiful, wear-resistant and pollution-resistant.
5. Hardness block: Use a standard Rockwell hardness tester and carry out the determination in strict accordance with the measurement and verification procedures. The laser etched serial number and hardness value can be traced within the validity period. Surface roughness and flatness meet regulatory requirements.
6. High quality: Fine parts processing, precise machine assembly, and strict quality inspection ensure the high quality of the instrument.
7. Good stability: the full-scale point is stable, the calibration point is stable, and the pointer does not "crawl".
8. Convenient conversion: Through the conversion table attached to the product manual or the "Hardness Conversion" mobile application, the Webster hardness value can be converted into Vickers, Rockwell, Brinell and other hardness values.
9. Portability: High-quality portable instrument case and well-fitting buffer sponge provide portability for the W-B20 series Webster hardness tester while also protecting the W-20 series Webster hardness tester as much as possible.
Standard configuration
Main unit, Wehrmer hardness block, small screwdriver, spare indenter, calibration wrench, instrument case
Common accessories
Indenter, Wehrmer hardness block, watch window glass
Weschler hardness tester model comparison list
ShenYangTianXing W-20 Wechsler hardness testerSpecifications
LIST | VALUE |
---|---|
Minimum specimen inner diameter | Φ10mm |
Maximum sample thickness | 6mm |
range | 0~ 20HW (equivalent to 20~ 110HRE) |
Error of indication | 0.5HW(5-17HW) |
Repeatability error | 0.5HW(5-17HW) |
Weight | 0.5kg |
ShenYangTianXing W-20 Wechsler hardness tester Packing list
Host x1, Wechsler hardness block x1, spare pressure needle x1, correction wrench x1, small screw driver x1, instrument box x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
ShenYangTianXing W-20 Wechsler hardness tester Comment
FAQ
- [Film Properties and Measurements] - Determination of film hardness
- Classification of Sclerometers [Full]
- Hardness unit conversion table, Brinell Rockwell Vickers hardness conversion formula
- Film Hardness Pencil inspection method
- What is film Hardness and how to measure it?
- Use and Calibration Steps of Wechsler Hardness Tester
- How is the Film Hardness Measured?
- Film Appearance performance test film Hardness
- How to measure film hardness
- Purpose and method of coating hardness testing