YIHENG DKZ-2C low temperature oscillating water tank Temperature range 10~ 99 ℃
YIHENG DKZ-2C low temperature oscillating sink adopts stainless steel liner and top cover, which has good corrosion resistance. DKZ-2C low temperature oscillating sink Temperature range is 10~ 99 ℃, input power is 1500W, temperature resolution is 0.1 ℃.
-
TENLIN BD-3010 High Precision Low Temperature Thermostat -30 ℃/± 0.01 ℃ 10L
16000.0 RMB -
CNSHP CH1015 Thermostatic bath 100 ℃/15L
2370.0 RMB -
HLC-1008W Horizontal High and Low Temperature Thermostat
6500.0 RMB -
NELE DC-3020 Low Temperature Thermostat Vertical 20L/-30 ℃ ± 0.05 ℃
16330.0 RMB -
NELE DC-5015-II High and low temperature cycle integrated machine 15L/-50 ℃
28900.0 RMB
Picture show
Brief introduction of DKZ-2C low temperature oscillating water tank
Yiheng DKZ-2C low-temperature oscillating water tank is used for laboratory research with high requirements for oscillation and temperature accuracy, and the experimental environment is relatively low temperature. The temperature range of DKZ-2C low temperature oscillating water tank is 10~99℃, and the input power is 1500W.
Application
DKZ-2C low-temperature oscillating water tank can be used for bacterial culture, fermentation, hybridization, chemical and biochemical reactions, enzyme and tissue research, etc.
Features and advantages
1. Stainless steel liner and top cover are used, which are anti-corrosion and easy to clean.
2. Microcomputer PID temperature controller, accurate and reliable temperature control, with timing.
3. Carry out heating and drying test.
4. Over-temperature sound and light tracking alarm, so that the samples are reliably protected and no accidents occur.
5. The DKZ-2C low-temperature oscillating water tank adopts an AC geared motor with stepless speed regulation, which can directly drive the shaking table, and has high linearity and low noise.
Multi-segment programmable controller (optional)
1) Microcomputer program controller, time and heating rate, to carry out constant temperature test at an extremely fast speed.
2) 15 sections and 30 steps can be preset, and the setting time of each section is 1~99 hours and 59 minutes.
3) Multi-segment programmable control can simplify the complex test process and truly realize automatic control and operation.
Show pictures
YiHeng DKZ-2C Thermostatic sinkSpecifications
LIST | VALUE |
---|---|
Temperature range | 10~99℃ |
Temperature fluctuation | ±1℃ |
Temperature resolution | 0.1℃ |
Temperature control method | Microcomputer PID control |
Circular mode | Internal/external circulation |
Total power | 1500W |
Power | AC220V 50HZ |
Working slot size | 438*310*250mm |
Speed range | 30~150rpm |
Amplitude | 30mm or 40mm optional (to be indicated in the indent) |
YiHeng DKZ-2C Thermostatic sink Packing list
Host x1, instruction manual x1, packing list x1, warranty x1, warranty card x1, fuse x1, shelf x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
YiHeng DKZ-2C Thermostatic sink Comment
No relevant comments
FAQ
- ActiveGB/T 32710.13-2016
- ActiveJJF 1030-2010
- ActiveGB/T 18856.4-2008
- ActiveFZ/T 50010.3-2011
- ActiveGB 9278-2008
- ActiveGB/T 5561-2012