NBCHAO
Lab Testing Instrument
Cart(0)
 |
AMITTARI
Area: China
Level: Manufacturer authorization
AMITTARI Products
$434.00
SE
AMITTARI LTMS-5K thread tensIon Meter, three-wheel tension yarn tension Measurement Instrument
+/- 1.5% or better0~5.0kgf 0~5000gf 0~49N 0~11Lbf
$469.00
SE
AMITTARI SAG-60 Small Hole Glossiness Meter
60 Degrees
Is this Glossiness Meter suitable for tile and Stone measurement?
$434.00
SE
AMITTARI LTMS-2K wire Tension Tester, wire Tension Tester
+/- 1.5% or better0~2.0kgf 0~2000gf 0~19.6N 0~4.4Lbf
$319.00
SE
AMITTARI AS-120DW Wood surface Hardness Gauge indentation Hardness Gauge
I want to measure Wood Surface Hardness. Is there any suitable instrument to recommend?
$434.00
SE
AMITTARI LTMS-1K wire Tension Tester, handheld fiber optic Tension Tester
+/- 1.5% or better0~1.0kgf 0~1000gf 0~9.8N 0~2.2Lbf
$699.00
SE
AMITTARI AW-20A + Webster Hardness Tester sample size 0.6-13 mm
I want to test the Hardness of aluminum alloy door and window profiles. Which Webster Hardness Tester is suitable?
$434.00
SE
AMITTARI LTMS-10K Wire Tensifier, Yarns, Fibers, Wires and Fibers
+/- 1.5% or better0~10.0kgf 0~98N 0~22Lbf
It is necessary to monitor the wire tension in real time and record the data. Which instrument is better to choose?
$506.00
SE
AMITTARI AL-161R luminometer luminance measurement, refractive luminometer
I want to buy a luminometer for indoor lighting inspection. Is the AMITTARI AL-161R suitable?
$459.00
SE
AMITTARI AL-161 luminometer digital luminometer
I want to buy a luminometer for daily light detection in the office and classroom. Any recommendations?
$281.00
AMITTARI AMS-00 Shore hardness tester measurement bench
I have a Shaw 00 hardness gauge and need a bench. What do you recommend?
$108.00
SE
AMITTARI USB data cable, which can be connected to most AMITTARI series test instruments through the RS-232 software system
I want to do a test on the GB/T13452.2 standard. Is this USB data cable okay?
Magnetic induction + eddy current0 ~ 1250µm±3%
Coating thickness on the high temperature mold, the size of the workpiece is only 20mm
7~30%
Meet the requirements of GB/T5009.3 grain moisture meter
0~80%
I want to do a test on the GB/T13025.3 standard. Is this soil moisture meter okay?
Can the Transmittance meter be connected to the PC?
0~750μm
Do you have the sand blasting shot peening Roughness Gauge involved in GB/T 8923.1?
Do you have the ultrasonic acoustics required by the ASTME797 standard?
The steel plate of the test surface here is pressed into a curved surface, and the axial section has elliptical arcs and circular arcs. The material is stainless steel with a thickness of 3 mm to 14 mm. Do you know if AT-140H is suitable?
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.