NBCHAO
Lab Testing Instrument
Cart(0)
 |
Defelsko
Area:
Level:
Defelsko Products
$812.00
SE
Defelsko FTS split conventional probe 6000 μm thick coating Measurement range
Magnetic Induction0~6000μm±1%
$2504.00
SE
Defelsko PRB200B Ultrasonic Thickness Gauge Probe PosiTector200B
ultrasound13~1000μm±3%
Substrate is mainly copper; Miscellaneous materials are also available, such as FR4 fiberglass, steel, and even compositions with copper wiring and fiberglass; FR4 fiberglass is Non-metallic
Inks type: epoxy resin
Inks thickness: 5-100μm
Accuracy requirements: +/- 2μm
Size of inks area: 2 * 2mm-7 * 7mm
$1316.00
SE
Defelsko FNDS composite coating probe, zinc/paint
Magnetic Induction + eddy Current0~1500μm±1%
Zinc plating on the surface of the part, Film thickness of zinc layer 5 microns, Film thickness of surface treatment protective layer 2-3 microns
Separate identification and measurement, the product material is not magnetic, can it be measured?
$2773.00
SE
Defelsko PRB200C Ultrasonic Thickness Gauge Probe PosiTector200C
ultrasound50~3800μm±3%
$770.00
SE
Defelsko NS conventional strip line probe measurement non-ferrous metal substrate coatings
Eddy Current0~1500μm±1%
$3041.00
SE
Defelsko PRB200D Ultrasonic Thickness Gauge Probe PosiTector200D
ultrasound50~7600μm±3%
I want to measure the film thickness of polyurea coatings, which model of Probe should I choose?
$366.00
SE
PosiPen thickness measuring pen type thermal spray-on lining Thickness Gauge
Magnetic Induction5~500μm±10%
I want to measure the thickness of the hot dip galvanized layer on the steel pipe. Is there any portable instrument recommended?
$548.00
SE
Defelsko F Integrated Probe 6000 F Adapted to PosiTector Host
Magnetic Induction0~1500μm±1%
$1017.00
SE
Defelsko N0S split 0 ° probe, thin coating
Magnetic Induction0~625μm±1%
Some of my pipes have platings. Can the curved ones be measured? If not, measure the inside, measure the outside, and measure the thickness outside the tube.
$747.00
SE
Defelsko FRS right angle probe for measurement of low headroom areas.
Magnetic Induction0~1500μm±1%
$1017.00
SE
Defelsko F0S split 0 ° probe 1150 μm/+/- 1% for small parts, edge coating measurements
Magnetic Induction0~1150μm±1%
$1017.00
SE
Defelsko F90S split 90 ° right angle probe measurement low headroom area
Magnetic Induction0~1150μm±1%
$1017.00
SE
Defelsko N45S split 45 ° micro probe, thin coating
Eddy Current0~625μm±1%
For small products such as screws and nuts, 1-2 MM with a small probe contact surface is required. Is this suitable?
$912.00
SE
Defelsko NKS thick coating probe for nonmagnetic metal substrates
Magnetic Induction0~13mm±3%
$1221.00
SE
Defelsko FNRS right angle probe for measurement of low headroom areas
Magnetic Induction + eddy Current0~1500μm±1%
$1017.00
SE
Defelsko FN detachable built-in probe magnetic Induction + eddy Current
Magnetic Induction + eddy Current0~1500μm±1%
$1286.00
SE
Defelsko FNTS thick coating probe 0~6mm/+/- 1%
Magnetic Induction + eddy Current0~6000μm±1%
$1890.00
SE
Defelsko FNGS Ultra Thick Probe 63.5mm Stainless Steel Cable
Magnetic Induction0~63.5mm±3%
25/50/75/125/250/500/1000/1500μm±2μm
Does the Defelsko plastic calibrated diaphragm meet the standard GB/T13452.2?
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.