JingTian

Mainly to measure bio-oil, tens of thousands of mpa.s need different temperatures to measure the corresponding viscosity Probably in the viscosity range of tens of thousands

Our products have fluids and viscous. If the flowability is not good, which Viscometer Spinning & weaving industry detergent, softener and the like need to be selected. There are liquid fluids and viscous.

Hello, we need a Viscometer here. I also saw related Viscometers on your website. We want to prepare a viscosity of 8mpa.s. What do you recommend? It is best to be a small one.

I would like to inquire about silicon nitride ceramics for 3D printing. The viscosity of the slurry, so the viscosity is also different, and the parameters are adjusted because the Solid content is different We want rheology and viscosity measurement in one

I need to measure viscosity at different rpm, will this Viscometer meet my needs?

Why is there a ring in the middle of the No. 29 rotor that keeps it vertical?

20-1 million mps The sample temperature is 80-150 degrees Celsius, right? How many samples do you need for this test? Organic Glass pmma

Can the Viscometer display the maximum viscosity value that can be measured at the current RPM?

What information can be displayed on the LCD screen?

Viscosity of epoxy resin Is there a solid epoxy resin viscometer? Can it be measured for solids?

For the hot-melt adhesive, which has a large flowability change at high temperature, can LVDV-1H maintain stable measurement?

Can you see the viscosity change in real time during the measurement process?

Our application requires high accuracy viscosity measurement. Is the NDJ-1S suitable?

Paints range viscosity is usually 10-70mp/s and occasionally 5000mp/s. According to JB/T7599-2013 enameled winding wire insulating paint related requirements to measure the viscosity, is there a recommendation?

viscosity Viscosity Pa. S 170 + 30 PaS Malcom PCU-205:10RPM 3Min, is there a replacement for this test?

The viscosity of our Spreader liquid is more than 20 mPa.s. Is this set suitable?

Dynamic viscosity not less than 450 and shear rate not less than 0.25 Hz

Is this model OK for polymer Viscometer?

If we need an alarm function in the measurement process to alert abnormal conditions, can LVDV-2 provide it?

Let me use an analogy for this No. 0 rotor. Can the viscosity of tap water be measured?

Thermostatic bath comes standard with this Viscometer, right?

What is the recommended viscosity measurement instrument for lithium battery slurry?

The liquid viscosity I need to measure is around 50 mPa · s. Does this Viscometer provide enough accuracy?

Can this accessory be applied to GB/T18856.4?

10 1/S, viscosity between 9000-16800mPa.s

We do electronic wet chemicals and photoresists. The viscosity measurement requires a rotational viscometer. The range is within 2000mpas. Which Viscometer is recommended for wet chemicals can have more samples, and the photoresist sample volume is below 20ml.

Can Viscometer's small sample adapter do 5ml?

Do you have the accessories mentioned in GB/T18856.4?

RVDV-1 Can this Viscometer measure the viscosity of 3.5-5 mPa.s?

Can I use this Viscometer for testing with thick paste alkyd paint?

Can measurement data be displayed and analyzed directly? Is additional software required?

How to control the measurement accuracy of liquid viscosity?

Does the heating furnace of this equipment have a waterproof design?