NBCHAO
Lab Testing Instrument
Cart(0)
 |
LANDTEK
Area: China
Level: Manufacturer authorization
LANDTEK Products
$319.00
SE
LANDTEK TM-1240 Ultrasonic Thickness Gauge
0.75~ 400mm (45 steel, determined by the probe)±(0.5%n+0.1)
Can this test fiberglass?
$444.00
SE
LANDTEK VM6360 Vibration Meter, Probe Line 6 Meters Long Frequency up to 10KHz
0.01~400mm/s0.001~4.000mm0.1~400.0m/s²
Can you show Frequency?
$389.00
SE
LANDTEK TM-8818 Ultrasonic Thickness Gauge 40cm/+/- 0.5%
0.75~ 400mm (45 #steel, determined by the probe)
How thick can this TM-8818 Ultrasonic Thickness Gauge be measured?
$521.00
SE
LANDTEK VM-6380 portable vibratIon Meter
0.001~ 4.0mm Peak-Peak 0.04~ 160.0mil0.01~ 400mm/s True RMS 0.004~ 16.0inch/s0.1~400m/s² 峰值0.3~1312ft/s² 0.0~40g
$304.00
SE
LANDTEK TM8811 Ultrasonic Thickness Gauge Suitable for metal, ceramic, hard Rubber & plastics, Glass and other hard materials
1.2~200.0mmФ8mm±(0.5%H+0.2)mm
Can this measure the thickness of Aluminum Panel and Steel Sheet?
$257.00
SE
LANDTEK DT-2859 Rotation speed meter
You can measure the spindle swirl/spin, Rotation speed 60,000 below, is this suitable?
$276.00
SE
LANDTEK HT6510DO Shore Durometer Plastic Medium to Hard Rubber Material
10HA~90 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF）0.1H
Our laboratory needs to test the Insertion Hardness of Rubber and Plastic to meet national standards. Is there any recommendation?
$271.00
SE
LANDTEK HT-1292D portable dew point instrument dewpoint temperature -40~40 ℃
-10~60°C（14~ 140 °F）10~95%RH-40~40°C（- 40~104 °F）
We measure the dewpoint temperature of the workshop, not the equipment pipeline. Can it be used?
$708.00
SE
LANDTEK ATP-100E ATP fluorescent bacteria Detector, high-sensitivity RLU detection
I want to buy an ATP detector for food factory hygiene inspection. Is the ATP-100E suitable?
$276.00
SE
LANDTEK HT6510OO Shore Durometer Sponge, Foam Rubber, Silicone, Gel Materials
10HA~90 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF）0.1H
$249.00
SE
LANDTEK HT6510E Shore Durometer Shore hardness inspection instrument Hard sponge, EVA
10HA~90 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF）0.1H
$316.00
SE
LANDTEK HT-6510S-B Sand surface Hardness Gauge Fine, coarse sand type/core
Can this hardness gauge record measurements?
$276.00
SE
LANDTEK HT6510B Shore Durometer for on-site Hardness measurement of finished rubber and plastic products
10HA~90 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF）0.1H
$5585.00
SE
LANDTEK DP29-60 Mirror dew point meter, standard, laboratory calibrated reference
$262.00
SE
LANDTEK GS-100DA Gaussian meter, Tesla meter, Gaussian meter
I want to measure the magnetic field of a motor or magnet. Is there a portable and easy-to-operate instrument recommended?
$276.00
SE
LANDTEK HT6510O Shore Durometer Soft resilience material, printing roller, Spinning & weaving fabric, Cotton, Acrylic, Rayon, Belon
10HA~90 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF）0.1H
$453.00
SE
LANDTEK LW-20 Webster Hardness Tester Hardness measurement 0~20HW
I want to test the Hardness of aluminum alloy profiles. Is there any instrument recommended for rapid on-site testing?
$506.00
SE
LANDTEK ATP-100 ATP fluorescent bacteria Detector, high-sensitivity rapid Detector
Food processing, we want to quickly detect microbial contamination, what equipment is recommended?
$239.00
SE
LANDTEK Shore Durometer testing device SHS-1 (D type) D type Shore Durometer dedicated
Is there a DIN53505 standard Shore hardness tester testing device?
$226.00
SE
LANDTEK Shore Durometer testing device SHS-1 (A, C type) Hardness Gauge A/C type matching
What durometer can this SHS-1 testing device stand be used for?
$85.00
SE
LANDTEK CTG-FBS F calibrated iron substrate
I want to do a test on the GB/T13452.2 standard, is this F-type calibrated iron substrate okay?
$226.00
SE
LANDTEK Thickness Gauge Probe 90 ° Right Angle Aluminum Based Probe
eddy current
$106.00
SE
LANDTEK CTG-CF coating calibrated diaphragm
I want to do a test on the GB/T13452.2 standard, is this coating calibrated diaphragm okay?
$124.00
SE
LANDTEK 232 data cable set, including 232 data cable and software CD-ROM for LANDTEK Thickness Gauge
Can this data cable be applied to GB/T13452.2?
$161.00
SE
LANDTEK Thickness Gauge probe 90 ° right angle iron based probe
magnetic induction
Does it not work if there is magnetic or no magnetic? My main one is the steel. I use him. He is not confident to use magnets to suck, he must be able to suck it.
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.