Pushen

Are all wet-film roller Thickness gauges available for inspection in the JJF1484 standard?

I want to test the leveling of paints, which instrument is suitable?

And what is the accuracy of the drawdown blade pressure?

Is there a corresponding test tape?

I want to test the cracking resistance of coatings, which instrument should I use?

Do you have a Scratch meter? We want to test the foil coating on titanium and test the bonding force, because the surface is relatively smooth, I am afraid that the puller will not be able to test it.

Is this the multi-blade Cross Hatch Cutter mentioned in ASTMD3359?

SZQ-150um Single Sided Film Applicator film accuracy?

Is there any equipment for measuring pigment flowability (thickness)? QB/T 4289-2012

Can the QHY Buchholz Indentation Tester be used to test exterior coatings?

5.1.2.1 Colorless transparent polyester film (Method A) Untreated, with a thickness of 30 m to 50 m and a size of not less than 100 m x 150 mm Note: By mutual agreement, thicker polyphenol films can be used. 5.1.2.2 black and white card paper (method B) All cards are the same size, at least 100 mmX200 mm printing and varnishing adjacent black and white areas Paints should be easily wetting but impermeable to solvent or water The dimensions of the black and white areas shall be not less than 80 mmX80 mm, unless otherwise agreed, using a reflection meter or For spectrophotometer measurement, the tristimulus values Y of the white area of the card paper should be 802, and the tristimulus values Y of the black area should not be greater than 5. In order to avoid errors caused by different batches of card paper, the card paper used in the test should be of the same batch 5.1.3 Film Applicator Composed of a range of Lacquer Film Applicators, these coatings applicators give a range of wet film thicknesses typically 100 m200 Paint film of uniform thickness. The light film scraped by the coating applicator should be at least 70 mm wide to obtain an area of uniform thickness and should not be less than 60 mmX60 mm Note that in order to obtain a uniform paint film, it is recommended to use an automatic cloth device

Can this tooth pitch be selected 1mm separately? Can this cutter head be replaced?

Meet ASTMD3794 Fineness gauge

I want to test the Hardness of automotive paint. Is PUSHEN BY-III (KP) suitable?

Is this sag tester compliant with ASTMD7514?

Scraper fineness meter, I don't know much about 150um single double-channel here. What's the difference?

What is the Spreader Width for the Purchase QTG Frame Applicator?

Fineness of Ground Gauge meets the standard GBT13217.5-2008 Liquid ink initial dryness detection method Really?

I want to measure the viscosity of paint, which Stormer Viscometer should I choose?

What is the scale interval of YQH-100 roller wet film thickness gauge?

Can the thinnest one be pressed to 0.1mm?

MMFT meter each layer board size?

Can the machine measure the Gloss of water-based wood paint?

My scraper broke. Can I sell the scraper separately?

Does the Stormer Viscometer come with a printer interface?

Hello, the Coating covering power test is a covering power test jam, right?

Do you have the large twill paper involved in ASTMD5150?

If this is to be equipped with quartz sand, what is the specification?

JSF-750A, this dispersion shaft is removable, and the removable rod length is 20cm?

4-Sided Film Applicator accuracy +/- 2μm refers to the same plane, the total deviation of 4 microns, or 2 microns?

Is this film laminating?

What is the number of teeth of this scratcher?

QBB Coating Specific Gravity Cup does not meet ISO2811 standard?

What are the requirements for Sample size?

Hardness meter, 1000g can measure 500 and 750g?

Can I buy green rubber roller accessories separately?

Fineness of Ground Gauge meets the standard GBT13217.5-2008 Liquid ink initial dryness detection method Really?