NBCHAO
Lab Testing Instrument
Cart(0)
 |
RDS
Area:
Level:
RDS Products
$155.00
SE
RDS 65 #1/4 "molded rod film thickness 148.6μm rod diameter 6.35mm
formed148.6μm6.35mm400mm
Do you support customization? Such as wet film thickness and length?
$155.00
SE
RDS 42 #1/4 "threaded rod film thickness 96.0μm rod diameter 6.35mm
formed96.0μm6.35mm40mm
Do you support customization? Such as wet film thickness and length?
$155.00
SE
RDS 36 #1/4 "wire rod Film Applicator film thickness 82.3μm rod diameter 6.35mm
formed82.3μm6.35mm400mm
Can this wire rod film be used to scrape fire-proof coatings film?
$155.00
SE
RDS 11 #1/4 "wire-wound Applicator rod film thickness 25.1μm
Wire-wound25.1µm6.35mm400mm
Meet ASTMD 4147 film scraper
$155.00
SE
RDS 23 #1/4 "Applicator rod film thickness 52.6μm rod diameter 6.35mm
formed52.6μm6.35mm400mm
Do you need to swirl/spin when filming?
$155.00
SE
RDS #37 Mayer Rods WFT 84.6μm length 400mm
formed84.6μm6.35mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$155.00
SE
RDS 7 #1/4 "threaded rod film thickness 16.0μm rod diameter 6.35mm
formed16.0μm 6.35mm400mm
Can this scraper be coated with UV Gloss oil?
$155.00
SE
RDS 21 #1/4 "experimental scraping rod film thickness 48.0μm rod diameter 6.35mm
formed48.0μm6.35mm400mm
Is there any ASTMD823 standard extrusion rod?
$155.00
SE
RDS 38 #1/4 "scraping rod film thickness 86.9μm rod diameter 6.35mm
formed86.9μm6.35mm400mm
Do you support customization? Such as wet film thickness and length?
$155.00
SE
RDS 50 #1/4 "molded rod film thickness 114.3 μm rod diameter 6.35mm
formed114.3μm6.35mm400mm
Do you support customization? Such as wet film thickness and length?
$155.00
SE
RDS #47 Mayer Rods Applicator rod WFT 107.4μm
wire-wound107.4μm6.35mm400mm
Can this thing measure Coating mass?
$179.00
SE
RDS 10 #1/2 "Steel Wire Drawdown Rod film thickness 22.9μm Wire diameter 0.25mm
Wire-wound22.9pm12.7mm400mm
Do you support customization? Such as wet film thickness and length?
$155.00
SE
RDS 75 #1/4 "Applicator rod film thickness 171.5μm rod diameter 6.35mm
formed171.5μm6.35mm400mm
Do you support customization? Such as wet film thickness and length?
$179.00
SE
RDS8 #Grooved Rods Coating Applicator 18.3μm experimental Coating Applicator
Formed18.3μm12.7mm400mm
$179.00
SE
RDS 8 #1/2 "Coating Mayer Rods WFT 18.3μm
Wire-wound18.3µm12.7mm400mm
Do you support customization? Such as wet film thickness and length?
$179.00
SE
RDS 6 #1/2 "inks Applicator rod Molded rds Spreader rod 13.7 μm
Formed13.7μm12.7mm400mm
$155.00
SE
RDS 28 #1/4 "wire-wound Applicator rod film thickness 64.0μm Wire diameter 0.71mm
Wire-wound64.0μ m6.35mm400mm
Do you support customization? Such as wet film thickness and length?
$179.00
SE
RDS 12 #1/2 "Molded Mailer Rod, Manual Spreader Rod WFT 27.4 μm
Formed27.4μm12.7mm400mm
$155.00
SE
RDS 21 #1/4 "wire-wound Spreader rod film thickness 48.0μm Wire diameter 0.53mm
Wire-wound48.0μ m6.35mm400mm
Can dyestuff color essence be scratched with this?
$161.00
SE
RDS 46 #3/8 "photosensitive paste rod 105.2μm molded wire-wound drawdown Bar
Formed105.2μm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$155.00
SE
RDS 26 #1/4 "wire-wound Applicator rod film thickness 59.4μm Wire diameter 0.66mm
Wire-wound59.4µm6.35mm400mm
Waterborne resin and nano ATO water-based slurry mixed with a wire rod scraping sample is OK?
$155.00
SE
RDS 44 #1/4 "wire-wound Mayer Rods film thickness 100.6μm Wire diameter 1.12mm
Wire-wound100.6μm6.35mm400mm
What are the Precautions for using Mayer Rods?
$155.00
SE
RDS 24 #1/4 "wire-wound Proofing rod film thickness 54.9μm Wire diameter 0.61mm
Wire-wound54.9µm6.35mm400mm
Which one should I choose if the Dry-Film thickness is around 12?
$161.00
SE
RDS 9 #3/8 "Molded Mayer Rod 20.6 μm inks Proofing rod
Formed20.6µm9.52mm400mm
What does 3/8 mean?
$161.00
SE
RDS 7 #3/8 "Proofing rod 16.0μm Applicator rod
Formed16.0μ m9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$161.00
SE
RDS 18 #3/8 "Molded Spreader Wet Rod 41.1μm Experimental Coating Applicator
Formed41.1µm9.52mm400mm
Can a solution be applied to a nonwoven substrate?
$161.00
SE
RDS 40 #3/8 "thin layer plate Coating Applicator 91.4 μm manual Coating Applicator
Formed91.4μm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$161.00
SE
RDS 16 #3/8 "Molded Linear Spreader Rod 36.6μm Thin Film wire-wound drawdown Bar
Formed36.6µm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$161.00
SE
RDS 10 #3/8 "Molded Wet Rubber Scraper 22.9μm Glue Stick
Formed22.9pm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$161.00
SE
RDS 65 #3/8 "Film Applicator 148.6μm formed Moulding device
Formed148.6µm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$161.00
SE
RDS 42 #3/8 "Transfer Printing Proofing rod 96.0μm inks Applicator rod
Formed96.0μm9.52mm400mm
What number of wire sticks do you use for glue proofing?
$161.00
SE
RDS 32 #3/8 "painted scraper 73.2μm painted wire rod
Formed73.2µm9.52mm400mm
What is the number of the 200 mesh?
$155.00
SE
RDS 30 #1/4 "wire-wound Applicator rod film thickness 68.6μm Wire diameter 0.76mm
Wire-wound68.6µm6.35mm400mm
Is the Spreader effect the same for RDS 1/4 and 3/8 Applicator rods?
$161.00
SE
RDS 11 #3/8 "Rod Coated Film Applicator 25.1μm Film Applicator
Formed25.1µm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$155.00
SE
RDS 34 #1/4 "wire-wound Mayer Rods film thickness 77.7μm Wire diameter 0.86mm
Wire-wound77.7µm6.35mm400mm
Can 34 #wired Spreader be used to scrape battery film?
$161.00
SE
RDS 60 #3/8 "Mayer Rods 137.2μm Coating Line Coater
Formed137.2μm9.52mm400mm
I use the coating applicator film and then there are scratches after drying. How to solve it? It is estimated that the viscosity of Resin is a bit large and it is not easy to levelling.
$161.00
SE
RDS 50 #3/8 "Applicator rod 114.3μm Molded Spreader rod
Formed114.3μm9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$161.00
SE
RDS 28 #3/8 "Paint Scraper 64.0μm Proofing rod
Formed64.0μ m9.52mm400mm
What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
$155.00
SE
RDS 32 #1/4 "wire-wound Applicator rod film thickness 73.2μm Wire diameter 0.81mm
Wire-wound73.2µm6.35mm400mm
How thick is 1/4 of No. 32 hanging out?
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.