NBCHAO
Lab Testing Instrument
Cart(0)
 |
TQC sheen
Area:
Level:
TQC sheen Products
Wire-wound128μm300mm
Coating contains 48%, and it is expected to make Dry-Film 61 microns. Is this suitable?
Wire-wound66μm300mm
The paint contains 10% solid content. If you want to scrape the ink and dry 7 microns, can this be done?
Wire-wound56μm300mm
My percent solids are 36 percent, and I want to apply Dry-Film 20 microns. Can this bar do it?
Wire-wound6μm300mm
Solid content 48% and Dry-Film 3 microns. Any suggestions?
Wire-wound46μm300mm
The solid content is about 15%. I want to make Dry-Film 7 microns. Is this model suitable?
Wire-wound34μm300mm
The paint contains 20% solid content. If you want to scrape the ink and dry 7 microns, can this be done?
Wire-wound32μm300mm
Coating contains 25%, and it is expected to make Dry-Film 8 microns. Is this suitable?
Wire-wound10μm300mm
My 36 percent solids, I want to apply Dry-Film 4 microns, can this stick do it?
Wire-wound18μm300mm
Solid content 12%, expected to make Dry-Film 2 microns, this stick number is OK?
Wire-wound26μm300mm
Coating contains 14%, and it is expected to make Dry-Film 4 microns. Is this suitable?
Wire-wound30μm300mm
The solid content of the product is 46%, and the dry-film thickness after scraping is 14 microns. Can this film applicator?
Wire-wound48μm300mm
Coating contains 16%, and it is expected to make Dry-Film 8 microns. Is this suitable?
Wire-wound40μm300mm
The solid content is almost 48%. I want to make Dry-Film 19 microns. Is this model suitable?
Wire-wound120μm300mm
Solid content of the sample is 35% and Dry-Film is 42 microns. Do you have any suggestions?
Wire-wound70μm300mm
The paint contains 40% solid content. If you want to scrape the ink and dry 28 microns, can this be done?
Wire-wound200μm300mm
I have 45 percent solids, and I want to apply Dry-Film 90 microns. Can this bar do it?
Wire-wound16μm300mm
Solid content 10%, expected to make Dry-Film 2 microns, this stick number is OK?
Wire-wound28μm300mm
My percent solids are 50 percent, and I want to apply Dry-Film 14 microns. Can this bar do it?
Wire-wound80μm300mm
The solid content of the product is 30%, and the dry-film thickness after scraping should be 24 microns. Can this film applicator?
Wire-wound60μm300mm
I have 44 percent solids, and I want to apply Dry-Film 26 microns. Can this bar do it?
Wire-wound12μm300mm
My percent solids are 12 percent, and I want to apply Dry-Film 1 micron. Can this stick do it?
Wire-wound20μm300mm
The solid content of the product is 22%, and the dry-film thickness after scraping should be 4 microns. Can this film applicator?
Wire-wound100μm440mm
Solid content of the sample is 35% and Dry-Film is 35 microns. Do you have any suggestions?
Wire-wound15μm440mm
Coating contains 45%, and it is expected to make Dry-Film 7 microns. Is this suitable?
Wire-wound4µm440mm
The solid content of the product is 32%, and the dry-film thickness after scraping should be 1 micron. Can this film applicator?
Wire-wound34μm440mm
Solid content of the sample is 25% and Dry-Film is 9 microns. Do you have any suggestions?
Wire-wound40μm440mm
The solid content of the paint is 28%. If you want to scrape the ink and dry 11 microns, can this be done?
Wire-wound6μm440mm
The solid content is about 18%. I want to make Dry-Film 1 micron. Is this model suitable?
Wire-wound8μm440mm
Solid content 38%, expected to make Dry-Film 3 microns, this stick number can?
Wire-wound12μm440mm
Solid content of sample 34%, Dry-Film to 4 microns, any suggestions?
Wire-wound38μm440mm
Coating contains 25%, and it is expected to make Dry-Film 10 microns. Is this suitable?
Wire-wound24μm440mm
Solid content 36%, expected to make Dry-Film 9 microns, this stick number can?
Wire-wound60μm440mm
We use emulsion paint to measure covering power, just built laboratory, any suggestions?
Wire-wound20μm440mm
The solid content of the product is 20%, and the dry-film thickness after scraping should be 4 microns. Can this film applicator?
Wire-wound10μm440mm
Is it feasible to prepare PTFE/PP composite diaphragm with Mayer-Rod?
Wire-wound50μm440mm
Solid content 30%, expected to make Dry-Film 15 microns, this stick number is OK?
Wire-wound30μm440mm
Solid content 36%, expected to make Dry-Film 11 microns, this stick number can?
Wire-wound120μm440mm
Solid content 16%, expected to make Dry-Film 19 microns, this stick number can?
Wire-wound56μm440mm
Can silicone coatings be applied to quartz Glass substrates?
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.