KOSON

Is there a bolt puller KS-50T? Are bolt puller and bolt puller the same thing?

I want to test the bond strength of exterior insulation board, is KOSON KS-6000C suitable?

Is it an instrument for testing the strength of concrete?

I want to measure the adhesion of waterproof coatings on concrete surfaces, which instrument is suitable?

Can this test the thickness of asphalt layer on concrete pavement?

Do you need to buy another grid drawing tool for this detector?

I want to test the adhesion of waterproof coatings on concrete surfaces. Is the KS-T (20mm) instrument KOSON suitable?

Do you have the Bond strength tester required by the GB14907 standard?

Our construction site to do concrete strength testing, what should choose Rebound Hammer?

Test slope anchor, more than 30 tons of drawing instrument, this one is suitable?

This drawing instrument can also directly measure polyurea bonded polyethylene (PE), right?

I want to test the position of the reinforcement and the thickness of the protective layer of the concrete floor, what instrument should I use?

I want to test the adhesion of concrete surface coatings, which instrument should I choose?

I want to avoid the steel bars in the wall when decorating, what instrument should I choose?

Is it suitable to use KOSON KS-100S bolt pullout instrument to test the pullout resistance of planting tendons?

I want to test the pullout resistance of the planting bar, is it suitable to use the KS-30S anchor pullout instrument?

Our construction site needs to test the shear strength of the masonry wall, what instrument should be used?

Does the KS-3T (light duty) have a pressure ring?

To make conductive silver paste, you need to test the size of the adhesion after the silver paste is coated, and test at high temperature, about 200 degrees, the coating area is very small; circular coating, the diameter is about 1cm

Can the KS-35 steel bar scanner be used for cable flaw detection?