Solid content meter
Solid content meter Instruments
Thermal weightlessness principle, halogen lamp heating, maximum weighing 150g, weighing readability 0.001g, moisture readability 0.01%, measurement of sample Moisture content, provide moisture value, Solid content, moisture regain and other parameters.
Touch screen, built-in printer, maximum weighing 150g, weighing readability 0.005g, moisture readability 0.01%, measurement of sample Moisture content, real-time display of moisture value, Solid content, moisture regain and other parameters.
Using thermal weight loss principle and annular quartz tungsten halogen infrared heating, the maximum weighing 120g, weighing readability 0.001g, moisture readability 0.02%, moisture temperature Precision +/- 0.5%, when displaying moisture, Solid content, temperature and other data.
Adopt thermogravimetric principle, maximum weighing 50g, weighing readability 0.005g, moisture readability 0.02%, Temperature range set 50 ℃ -160 ℃, support a variety of data display (such as time, real-time temperature, moisture, Solid content, etc.)
500W halogen lamp heating, waterproof and explosion-proof, Weighing range 120g, weighing readability 0.005g, heating Temperature range 40-180 ℃, can be connected to a thermal printer, can quickly dry and measure Solid content and moisture value.
Weighing readability 0.001g, Weighing range 120g, moisture readability 0.01%, Data storage 100 groups, suitable for research institutes, universities, inspection institutes, Measurement institutes, enterprises and institutions are widely used in various industries such as plastic particles, food, sludge, tea, corn feed, battery powder, metal powder, dry goods, etc. Solid content measurement for sample input rapid drying.
Readability 0.001g, Weighing range 120g, the results show test temperature, test time, Moisture content, Solid content, drying weight, Dynamic Linear dispersion diagram, Moisture regain, Solid content, weight loss, dry weight.
- Weighing readability：0.001g
- Maximum weighing value：120g
- Water readability：0.01%
- Sensors：Imported German HBM
FANGRUI DHS-16-A Moisture meter is a high-precision Solid content measuring instrument. It adopts the principle of electromagnetic force equilibrating. The minimum weighing reading of DHS-16-A Moisture meter is 0.001g and has a timing function.
Solid content meter Articles
-
Emulsion Solid content determination
Solid content of emulsion is an important indicator to evaluate its performance. It directly affects the performance and application effect of emulsion, such as viscosity, Stability and Spreader. By understanding Solid content, you can optimize the production process, improve raw material utilization and reduce costs.
-
Three methods for determination of Solid content of concrete admixture
Solid content of concrete admixtures plays an important role in modern concrete technology. Solid content determination is the key to ensure the stability of its performance. In this paper, three commonly used methods for determination of Solid content are introduced in detail: drying method, dilute drying method and vacuum drying method.
-
Solid content determination method
Solid content refers to the percentage or mass fraction of solid matter contained in a liquid. It is an indicator that describes the concentration or content of solid matter in a liquid. Solid content is often used to describe the content of solid matter in various solutions, suspensions, emulsions, colloids and other liquid systems.
-
How to convert Dry-Film and wet film thickness of concrete structure paintings?
To convert between dry-film thickness and wet film thickness, you can use a parameter called "conversion rate" or "Solid content". This parameter represents the volume reduction of the Coating during the drying process.
-
Performance Testing Subjects and Testing Instruments of Waterborne Epoxy Resin Coatings
The coating performance test of waterborne epoxy resin coatings can currently be tested from several aspects such as coating appearance, solid content, viscosity, fineness, curing time, adhesion, impact resistance, acid resistance, alkali resistance and salt resistance. Relevant test methods can refer to the current standards of coatings.
-
Detection of Phenyl-acrylic Waterborne Varnish Emulsion and Film-forming Properties
The solid content, viscosity, pH, gloss, water resistance and wear resistance of phenyl-acrylic water-based varnish emulsion were tested.
-
Preparation of Graphene Oxide Films _ Heating Coating Machine
This paper mainly introduces the application of experimental heated coating machine in the preparation of graphene oxide films, and uses the coating machine to prepare GO films with different solid contents.
-
Preparation and Performance Test of Ultraviolet Curable Urushiol-Based Epoxy Acrylate Coatings
Preparation and performance testing of UV-curable urushiol-based epoxy acrylate coatings, including mechanical properties, gloss, solid content and corrosion resistance tests of UV-curable films.
-
Performance Test and Characterization of Polyacrylate Mixed Suspension
Performance test and characterization of polyacrylate mixed suspension: solid content test, stability test, coating film thickness test, gloss test, light transmittance test, SEM characterization, coating film rubbing resistance test and water resistance test, etc.
-
How to measure solid content?
The solid content is measured by GB/T 1725. After drying the clean surface dish, weigh the mass m0, accurately weigh about 1g of the sample in the surface dish, the total mass m1, and place it in the oven at 150 ± 2 ° C. After drying for 2h, the total mass m2, and carry out 3 parallel experiments at the same time to ensure that the error before and after does not exceed 0.01g.
-
Coating routine performance inspection items
The routine performance inspection items of coatings include fineness, viscosity, solid content, density, dryness, sagging, color, etc.
-
Test Printing ink Viscosity with 4 cups
Printing ink Viscosity was tested by coating 4 cups, this experiment tested the Viscosity of Printing ink formulated with waterborne epoxy resin emulsions with different Solid contents.
-
Adhesive coating prepared by RDS wire rod film
Adhesive coating was prepared with RDS wire rod film device, the experimental Adhesive was diluted with ethyl acetate to 10 mass% Solid content, and then a small amount of wire rod with RSD4 ink rod (coating Film thickness about 7 μm) was evenly coated on 50 μm BOPP film, a part of it evaporated at room temperature, and a part was dried at 120 ° C for 1h to obtain Adhesive coating. The coating performance can be detected.
Solid content meter FAQs
Selection
Solid content meter Terms
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.