2025/10/30
Floor coatings pencil hardness
Floor coatings Pencil Hardness is a test of the Hardness of a paint by applying pencils of different Hardness to the surface of the paint. This test method can be used to evaluate the scratch resistance and durability of the paint. By using pencils of different Hardness, it is possible to determine how the paint behaves under different degrees of scratch pressure, thus selecting the paint suitable for the specific application needs.
Floor coatings pencil hardness Instruments
LANDTEK HT-6510P Pencil hardness Tester film Hardness detectionSE
Stainless steel material, conforms to GB standard; standard 500/750/1000g load, 13 different Hardness pencils, as well as pencil sharpener and eraser.
- Load：500/750/1000g
- Measurement Certificate：without
- material：stainless steel
- Standard pencil：13 sticks
DUBAN DB20-LX-P Pencil Hardness Tester paints Hardness Gauge SE
100G/750g/500g can replace three kinds of loads, in line with the standard Coating pencil hardness testing indicators, with 1 set of 6B-6H pencils, eraser X1, pencil sharpener X1, horizontal pad X1, No.400 sandpaper X1.
- load：100g/750g/500g
- The angle between the pencil and the measured indicates that：45°
- Scratch speed：About 1mm/s
- Standard pencil：1 set of pencils (6B-6H)
CHINA NBC-5608 Pencil Hardness Tester Pencil Hardness TesterSE
Test angle 45 °, test platform traverse speed 5mm/sec, adjustable, travel distance 40mm, low noise, stable, test stroke adjustable according to specific requirements.
- test angle：45°
- Nominal Mass：500g、250g、250g
- Test platform traverse speed：5Mm/sec, adjustable
- travel distance：40mm
TRUIT TR 5105/A Pencil Hardness TesterSE
Touch screen, electric, desktop with reset function, there are three loads of 500, 750, and 1000g, the travel distance is adjustable from 0-90mm, and a set of 13 Chinese standard pencils is standard.
- test angle：45°
- Load：500g、750g、1000g
- Load：250G two, 500g one
- Test platform traverse speed：0~300mm/min
TRUIT TR 5105/1 Benchtop paint film Pencil Hardness TesterSE
Pencil Hardness Tester, with 500g, 750g, 1000g three load, with 13 Chinese pencils, suitable for Coating hardness testing.
- load：500g、750g、1000g
- Standard pencil：Chinese pencils (13 pcs)
- load：250G 2, 500g 1
- Platform size：120x80mm
TRUIT TR 5100/3 coating Pencil Hardness Tester Load 1000gSE
The load is 1000g, in line with GB/T 6739, ASTM D 3363, ISO 15184 standards, with its own observation level, and the center arc design of the wheels on both sides.
- Load：1000g
- Standard pencil：6B-6H（13支）
- test angle：45°
- Scratch speed：1mm/s
TRUIT TR 5100/2 Pencil Hardness Tester 750gSE
The load is 750g, in line with GB/T 6739, ASTM D 3363, ISO 15184 standards, with its own observation level, and the center arc design of the wheels on both sides.
- Load：750g
- Standard pencil：6B-6H（13支）
- test angle：45°
- Scratch speed：1mm/s
TRUIT TR 5100/1 Pencil Hardness Tester 500gSE
The load is 500g, in line with GB/T 6739, ASTM D 3363, ISO 15184 standards, with its own observation level, and the center arc design of the wheels on both sides.
- Load：500g
- Standard pencil：6B-6H（13支）
- test angle：45°
- Scratch speed：1mm/s
Floor coatings pencil hardness Articles
-
Film hardness testing method: pendulum hardness, pencil hardness, etc
Film performance testing is one of the key steps in evaluating film mass and applicability. In film performance testing, hardness is an important indicator, which reflects the mechanical strength and resistance to deformation of the film. The hardness of the film has a direct impact on its performance such as scratch resistance and wear loss resistance.
- Industrial floor coatings key performance and detection method
- Epoxy resin floor coatings key performance and detection method
- Analysis of hardness measurement by ASTM D3363 pencil method
-
Pencil Hardness Tester test procedure, application and different Hardness Pencil introduction
Pencil hardness tester is a device that determines coating or surface Hardness by measuring coating resistance to pencil scratches of different Hardness.
-
Pencil hardness testing of film
Film pencil Hardness is a commonly used film physical performance test method to evaluate the Hardness and wear resistance performance of coating films. During the test, pencils with different Hardness are used to scratch the coating surface to determine the Hardness grade of the coating according to the Hardness of the pencil.
-
Ceramic Coated Pencil Hardness Test
The pencil hardness test is just one of many tests used to evaluate coatings. The hardest is 10H, followed by 9H, 8H, 7H, 6H, 5H, 4H, 3H, 2H and H. F is the middle of the hardness scale; then HB, B, 2B, 3B, 4B, 5B, 6B, 7B, 8B and 9B, which are the softest.
-
Relevant standards for pencil Hardness Testers
This article mainly understands the relevant standards of pencil hardness testers, and provides a reference for users to purchase and use pencil hardness testers.
-
What is polyurethane floor coating?
Polyurethane is a polymer attached to a compound group called carbamate. Polyurethane is essentially a thermoset polymer; that is, it does not melt when heated.
-
What is epoxy floor coating?
Epoxy floor coating systems consist of two different elements: epoxy and polyamine, a hardener. These two ingredients are mixed before use. Epoxy floor coatings are known for their hardness, durability and impact resistance.
-
What is a pencil hardness test?
Pencil hardness testing is an evaluation method used to determine the hardness of a material (usually a coating material). In order to perform a pencil hardness test, graphite pencils of different hardness move on the coated surface. Its hardness relative to graphite pencils depends on the softest pencil, which leaves scratches on the coated surface.
-
How does the pencil Hardness Tester test the hardness of coated insulating glass?
The film hardness of coated insulating glass is an important part of the physical properties of coated glass. This paper introduces how to test the hardness value of coated insulating glass with a pencil hardness tester.
-
Resin varnish _ thick film coating _ performance testing scheme [with instrument list]
The performance testing of resin varnish and thick film coatings includes temperature resistance, chemical resistance, thermal weight loss analysis, contact angle test, gloss test, pencil hardness test, and film adhesion test.
-
What are the requirements for preparing test samples for aqueous dip paint?
This paper describes that the preparation test sample of water-based dip paint needs to meet the requirements of paint film appearance, impact resistance, grid test, pencil hardness and other properties.
Floor coatings pencil hardness FAQs
- Pencil hardness tester with what pencil?
- Pencil hardness tester is suitable for testing which materials?
- How is film Hardness performance tested?
- Pencil hardness tester for different Color coatings?
- What is the use of Pencil hardness tester?
- What are the influencing factors of pencil durometer?
- How to Test Pencil Hardness of Powder coatings?
- How to choose Pencil hardness tester specifications?
- What is the difference between Pencil hardness tester and cross-cut tester?
- Pencil hardness tester pencil hardness comparison what are the differences?
Selection
Floor coatings Pencil Hardness refers to the scratch and abrasion resistance performance of coatings applied to floor surfaces and is commonly used to provide decorative and protective floor surfaces. Testing methods typically involve the use of pencil Hardness Testers to assess the Hardness of coatings to ensure they can withstand the effects of walking and abrasion.
Floor coatings pencil hardness Terms
- What is epoxy resin floor coating?
- What is Pencil hardness tester? Working principle and detection method
- What is a portable Pencil hardness tester?
- What is a pencil hardness tester?
- What is Pencil hardness tester?
- What is 750g Pencil hardness tester?
- What is thin coating waterborne epoxy flooring paint?
- What is Pencil Hardness Tester?
- What is paint film pencil hardness testing?
- What is 750g Pencil hardness tester?
Floor coatings pencil hardness Standards
-
Active
EN 13523-4-2014
Coil coated metals - Test methods - Part 4: Pencil hardness
-
Active
NF T37-001-4-2014
Coil coated metals - Test methods - Part 4 : pencil hardness
-
Active
JJF (石化)007-2018
Calibration Specification for Pencil Hardness Testers
-
Active
AS/NZS 1580.405.1-1996
Paints and related materials - Methods of test - Determination of pencil hardness of paint film
-
Active
GB 38468-2019
Limit of harmful substances of interior floor coatings
-
Active
HG/T 3829-2006
Floor coatings
-
Active
HG/T 5057-2016
Water-based epoxy floor coatings
-
BS EN 13523-4-2001
Coil coated metals — Test methods — Part 4: Pencil hardness
Focus on online sales of Lab Testing Instruments
CopyRight © NBchao.Com 2012-2024, All Rights Reserved.