Knowledge list

• 10021| Characteristics of drying performance of polyurethane paint for wood

  2016-08-18

• 10022| The drying characteristics of amino baking paint

  2016-08-18

• 10023| Requirements for large paint during drying

  2016-08-18

• 10024| The drying characteristics of nitro paint

  2016-08-18

• 10025| Phenolic resin coating drying characteristics

  2016-08-18

• 10026| Measurement of film salt fog resistance

  2016-08-18

• 10027| Introduction of film moisture and heat resistance performance test

  2016-08-18

• 10028| Determination of film resistance to liquid medium performance

  2016-08-18

• 10029| How to determine the gasoline resistance of film?

  2016-08-18

• 10030| How is film water resistance measured?

  2016-08-18

• 10031| Film heat resistance and wear resistance

  2016-08-18

• 10032| How to measure film Gloss performance?

  2016-08-18

• 10033| Influence and effect of different drying methods on film

  2016-08-18

• 10034| Introduction to the principle and application of roller painting

  2016-08-18

• 10035| Dip coating principle and precautions

  2016-08-18

• 10036| Introduction of coating principle and equipment

  2016-08-18

• 10037| How does Adhesion evaluate?

  2016-08-17

• 10038| How to Measure the Pencil Hardness of Film?

  2016-08-17

• 10039| How to Measure Film Adhesion?

  2016-08-17

• 10040| How to prepare a test board?

  2016-08-17

• 10041| ISO 8130-11:1997 - Determination of fluidity of inclined plates - Introduction

  2016-08-17

• 10042| ISO8130-10:1998 Determination of deposition efficiency Introduction

  2016-08-17

• 10043| ISO8130-5:1992 Determination of fluidity of powder/air mixtures "Introduction

  2016-08-17

• 10044| Introduction to ISO8130-3:1992 "Determination of Density by Liquid Displacement Density Cup Method"

  2016-08-17

• 10045| Introduction to ISO8130-2:1992 "Determination of Density by Gas Comparison Ratio Method (Arbitration Law) "

  2016-08-17

• 10046| ISO8130-1:1992 Determination of particle size distribution by screening method

  2016-08-17

• 10047| GB/T16597-1996 Determination of stoving time mass loss of coating powder

  2016-08-17

• 10048| GB/T16995-1997 "Determination of livering time of thermosetting coating powder at a given temperature"

  2016-08-17

• 10049| Special Application Examples of K-bar Wire Bar and Drawdown Plate

  2016-08-17

• 10050| Determination of coating powder non-volatile matter content and curing time test

  2016-08-16